Current through Register No. 50, December 12, 2024
Section Agr 1405.38 - Form for Placed in Service/Inspection Report for Taxi Meters(a) In addition to other requirements set by rule, statute, or other law, each registered service technician shall complete and submit "Placed in Service/Inspection Report Form TAXI 08-2007 (REV. 07/14)" to the department.(b) A registered service technician shall furnish the following on "Placed in Service/Inspection Report Form TAXI 08-2007 (REV. 07/14)":(2) Full address, including city, state, and zip code;(3) The following information about each taxi meter:b. Whether certified and the stamp number;c. Whether tested and calibrated for device license;g. Vehicle identification number;h. Registered plate number;k. Serial number of meter;l. Model number of meter;o. Odometer reading-ending;p. Odometer reading-beginning;(4) The following information about each test data:b. Actual discharge rate;c. Totalizer reading start; andd. Totalizer reading finish;(5) The following information about each prover data:c. Correction for expansion/contraction of prover;d. Volume correction for prover reading; ande. Prover reading corrected to 60 degrees Fahrenheit;(6) The following information about each meter data: a. Gross meter reading; and(7) If an uncompensated run or systems that give both gross and net readings, the following: a. Average meter temperature;b. Volume correction for meter reading; andc. Meter reading corrected to 60 degrees Fahrenheit;(8) Net delivery error; and(9) Correct gross delivery error.N.H. Admin. Code § Agr 1405.38
Amended by Volume XXXVII Number 50, Filed December 14, 2017, Proposed by #12424, Effective 12/1/2017, Expires 12/1/2027.