Section 484D.210 - Faults requiring removal of tire; tread-depth measurements1. The outside diameters of tires used on dual wheels must be such that each tire will contact the level roadway at all times. A tire must be removed from service if it has: (a) Any portion of the ply or cord structure exposed;(b) Any bump, bulge or knot related to ply or tread separation or partial failure of the tire structure;(c) A ply or cord break; or(d) A cut which extends more than 1 inch in any direction on the outside of the tire and is deep enough to reach the body cords.2. For the purposes of NAC 484D.190 to 484D.215, inclusive, tread-depth measurements must not be made where tiebars, wearbars, humps or fillets are located.Nev. Admin. Code § 484D.210
[Dep't of Motor Veh., Pneumatic Tires Reg. §§ V & VI, eff. 10-4-73] - (Substituted in revision for NAC 484.220)