Section 484D.275 - Mounting of emblem on vehicle1. The emblem must be mounted point up as shown in subsection 2 of NAC 484D.265 in a plane perpendicular to the direction of travel plus or minus 10 degrees. It must be placed at the rear of the vehicle, unobscured and 2 to 6 feet (0.61 to 1.83 m) above the ground measured from the lower edge of the emblem. It may be permanently attached to equipment when practical. Portable emblems must be mounted by using bracket sockets and identification emblem brackets specified in ASAE Standard § 277, Mounting Brackets and Socket for Farm and Light Industrial Equipment Warning Lamp and Slow Moving Vehicle (SMV) Identification Emblem.2. The emblem does not replace warning devices as tail lamps, reflectors, flashing lights or warning flags and is not to be used as a clearance marker for wide equipment.Nev. Admin. Code § 484D.275
[Dep't of Motor Veh., Emblem for Slow Moving Veh. Reg. § 7, eff. 12-26-75] - (Substituted in revision for NAC 484.275)