Section 477.409 - Required equipment for each shop and vehicle used for serviceThe following equipment must be located in each shop or vehicle used to service fire extinguishers and fixed fire extinguishing systems:
1. A dry compressor with a moisture monitor and pressurizing station or a dry nitrogen supply and pressurizing station;2. A carbon dioxide supply fill station or a letter of agreement from a licensed fill station;3. A clean agent supply and fill station or a letter of agreement from a licensed fill station;5. Cylinder racks, as appropriate;6. A dry chemical fill station with an approved closed recovery system;8. Beam scales that are 100 and 500 pounds, which must be calibrated annually;9. Low pressure hydrostatic test equipment or a letter from a company that provides hydrostatic test service;10. Test cages, as appropriate;11. A cylinder vise and bench;13. Gauges, which must be calibrated annually;14. A system for keeping records which must be available for inspection;15. Power drills and bench grinders;16. Approved service tags and internal tags;21. An internal inspection light;22. A scale which is able to measure weights up to 50 pounds and which is calibrated annually;23. A 4-pound by 1-ounce cartridge scale;24. Assorted recharge adapters;26. Pipe and screw extractors;27. Wire and nylon bristle brushes;29. Drift pins, punches, reamers and rivets;30. Pliers, wrenches and screwdrivers;31. Knives, files and hacksaws;32. An approved closed recovery collection system;35. A quantity of mixed extinguishing agents necessary for servicing equipment;36. Assorted discharge nozzles;37. Assorted discharge hoses;39. Assorted pressure gauges;40. Assorted valve springs;41. Assorted valve stems;42. Assorted siphon tubes;44. Brackets and wall hangers; and45. A chain hoist and trolley, as appropriate.Nev. Admin. Code § 477.409
Added to NAC by St. Fire Marshal by R090-10, eff. 12-30-2011