Section 455C.184 - Requirements for reinstallation1. If a boiler or pressure vessel is removed from its original site and is to be reinstalled at the same location or reinstalled at a new location with or without a change of ownership, the contractor must apply to the Mechanical Compliance Section for a permit for installation before reinstalling the boiler or pressure vessel. The fittings and appurtenances must comply with the requirements for the installation of a new boiler or pressure vessel.2. If a standard boiler or pressure vessel is to be moved to another state for temporary use or repair, the owner of the boiler or pressure vessel or his or her agent must apply to the Mechanical Compliance Section for approval to reinstall the boiler or pressure vessel within this State.3. Each time a portable boiler or pressure vessel is to be moved for temporary use within this State, a contractor who is to install the portable boiler or pressure vessel must apply to the Mechanical Compliance Section for a permit for installation before installing the potable boiler or pressure vessel.Nev. Admin. Code § 455C.184
Added to NAC by Div. of Industrial Relations by R101-02, eff. 12-15-2004; A by R045-20A, eff. 10/26/2020