Nev. Admin. Code § 453A.Sec. 174

Current through December 12, 2024
Section 453A.Sec. 174 - NEW

Each marijuana product manufacturing facility shall ensure that:

1. The surfaces and utensils that have direct contact with marijuana products are adequately washed, rinsed and sanitized.
2. After being cleaned, surfaces of equipment and utensils that have direct contact with marijuana products are sanitized in:
(a) Hot water manual operations by immersion for at least 30 seconds with a temperature of 170°F (77°C) or above;
(b) Hot water mechanical operations by being cycled through equipment that is set up and achieving a utensil surface temperature of 160°F (71°C) as measured by an irreversible registering temperature indicator; or
(c) Chemical manual or mechanical operations, including, without limitation, the application of sanitizing chemicals by immersion, manual swabbing, brushing or pressure spraying methods using a solution as specified on the manufacturer's label use instructions that are approved by the Environmental Protection Agency, by providing an exposure time of at least 30 seconds unless the manufacturer's label use instructions provide otherwise.

Nev. Admin. Code § 453A.Sec. 174

Added to NAC by Div. of Pub. & Behavioral Health by R092-17AP, eff. 2/27/2018
NRS 453D.200