Section 445A.2912 - Plants for sewage treatment: Continuing education requirements for operators1. Except as otherwise provided in subsection 3, every 2 years, each holder of a full certificate as an operator of a plant for sewage treatment must complete the following requirements of continuing education within the effective period of the certificate to qualify for the renewal of the certificate: (a) The holder of a Full Grade I certificate must earn at least 5 contact hours of participation in a course of training.(b) The holder of a Full Grade II certificate must earn at least 10 contact hours of participation in a course of training.(c) The holder of a Full Grade III certificate must earn at least 15 contact hours of participation in a course of training.(d) The holder of a Full Grade IV certificate must earn at least 20 contact hours of participation in a course of training.2. An operator who holds a Restricted Grade I certificate must earn at least 5 contact hours of participation in a course of training within the effective period of the certificate to qualify for the renewal of the certificate. 3. An operator who holds a full certificate and a restricted certificate at a higher grade level than the full certificate must comply with the requirements for continuing education for the full certificate and complete an additional 5 contact hours of participation in a course of training to qualify to renew both certificates.4. A course of training required pursuant to this section must be approved by the Division or its designee pursuant to NAC 445A.2915.Nev. Admin. Code § 445A.2912
Added to NAC by Environmental Comm'n by R155-17A, eff. 5/16/2018; A by R121-19A, eff. 8/26/2020