Section 444.74751 - Report of designThe report of the design of the materials recovery facility required by NAC 444.74747 must:
1. Include a detailed description of the site of the facility, a diagram indicating the manner in which the materials are processed at the facility and the design capacity and environmental controls for the facility.2. Be prepared under the direction of and signed and stamped by a professional engineer who is licensed in this State.3. Include a general location map that indicates land use and zoning within 1 mile of the materials recovery facility.4. Include plans and specifications of the materials recovery facility in sufficient detail to demonstrate compliance with the standards for the design of the facility set forth in NAC 444.74759. The plans must:(a) Be drawn to a scale of not more than 200 feet per inch;(b) Indicate existing and proposed contours;(c) Indicate access roads and traffic routes around and within the materials recovery facility;(d) Include provisions for the control of surface water to minimize the contact of storm water with waste materials and to prevent pollutants or other contaminants from entering the waters of the State;(e) Indicate fencing, areas for storing equipment, facilities for employees, areas for receiving and handling waste, maintenance areas and any other appurtenances;(f) Include the maximum processing rate of the facility and the maximum storage capacity, in cubic yards, for processed and unprocessed waste and recovered materials;(g) Include provisions for controlling odors and dust to prevent a public nuisance;(h) Define the population and area that will be served by the materials recovery facility; and(i) List the anticipated types, quantities and sources of solid waste that will be received at the materials recovery facility.Nev. Admin. Code § 444.74751
Added to NAC by Environmental Comm'n by R173-99, eff. 2-9-2000