Section 296-10.003 - SHIPPING REQUIREMENTS10.003.01 Applicants or holders of an Authorized Gaming Operator license must confirm before a shipment of Gaming Equipment takes place that the manufacturers and suppliers providing the gaming equipment are each approved by the Commission as a Gaming-Related Vendor.10.003.02 In addition to the above requirements, Authorized Gaming Operators must also adhere to the following requirements: 10.003.02A Ensure the safe and secure transport of all Gaming Equipment destined for Nebraska.10.003.02B Ensure all Gaming Equipment bear an identifying plate listing the serial number and model number and gaming manufacturer name or other unique identifier approved in writing by the Director.10.003.02C Ensure all Gaming Equipment is shipped directly to an approved location for an applicant for a Authorized Gaming Operator license or location for a Authorized Gaming Operator or another location expressly authorized by the Director. If the gaming manufacturer has a warehouse in Nebraska, it must be approved by the Commission and the Gaming Equipment may be shipped to the warehouse for any preparation/configuration work required prior to shipping it to the authorized location.10.003.02D Ensure the Gaming Equipment is placed in such a manner as to offer easy access to the Commission staff to verify the serial number and model number on the ID plate, or other unique identifier approved in writing by the Director.10.003.03 Any licensee that removes Gaming Equipment from an authorized location to be transported outside of Nebraska, or to another authorized location within Nebraska is responsible for ensuring the secure transportation of the Gaming Equipment leaving the possession of the applicant for a Authorized Gaming Operator license or the Authorized Gaming Operator that the Commission has approved the operator for the transportation of that equipment, and the compliance with all relevant requirements in this procedure.296 Neb. Admin. Code, ch. 10, § 296-10.003
Adopted effective 5/16/2022Amended effective 2/1/2023