Section 285-1-003 - EXHIBIT003.01 If one exhibit is sufficient to designate the service area, such exhibit shall be designated as exhibit "A". If more than one exhibit is necessary, they shall be numbered consecutively as exhibits "A-1", "A-2", etc.003.02 Rural area exhibits shall have a scale of not less than one-half inch per mile.003.03 Urban area exhibits shall have a scale of not less than two inches per mile.003.04 Urban area exhibits where used shall extend at least one mile beyond the present zoning area of the city.003.05 The exhibit shall show ownership and-location of the electric lines above 700 volts of each supplier outside of the corporate limits of villages and cities. Lines of 34.5 KV and above shall have their voltage shown.003.06 Each exhibit shall be blue on white or black on white.003.07 The service area boundary line shall be located on 1 mile, 1/2 mile, or 1/4 mile lines, if possible.003.08 The location of each distribution line used to determine the service area boundary line shall be accurately shown. Customers served shall be shown where necessary to clearly define the service area boundary.003.09 There shall be an exhibit or exhibits for each agreement. The number of service areas which may be placed on a print shall not be limited since the same original tracing may also be used with another party and another agreement.003.10 Each exhibit shall show numbers of sections, townships, and ranges to indicate the legal description. It shall also show roads, highways, railroads, rivers, etc. Corporate and zoning areas of all villages and cities shall be shown as well as airports, military Installations, and industrial tracts outside of the corporate limits.003.11 The exhibits shall be folded to 8 1/2 x 11 inches with title block visible. Maximum size of each sheet shall not exceed 42 x 60 inches.003.12 The title block shall be as per following sample. Signature and title of the authorized officer of the power supplier shall be affixed to the exhibit in the space provided, as shown on the sample.003.13 The boundary line between service areas shall be a heavy dashed line so as to be clearly distinguishable from the distribution lines shown.285 Neb. Admin. Code, ch. 1, § 003