Section 457-16-002 - APPLICATION For incidental underground water storage, one application may request modification of multiple appropriations associated with a specific project. All information shall be compiled and submitted in a loose-leaf binder with maximum dimensions of 11 inches by 11 inches by 4 inches. Maps, plans and drawings must be of a size sufficient to clearly depict the subject matter, but must be folded to dimensions not to exceed 11 inches by 11 inches. If a project map was produced using GIS or drawing software such as ArcView, ArcMap or AutoCad, the computer files that were used in creating the project map should be provided to the Department of Natural Resources along with the map. All files used or generated in the creation of the project map should be copied onto recordable compact discs (CD-R) or other storage media acceptable to the Department. The CD should be labeled using an indelible marker with applicant's name, description of the project, date the CD was written, and the person and agency responsible for creating the map. Information identifying the year and source of base data (aerial photography) that was used in creating the project map should also be submitted. A complete table of contents for the application shall be provided. The application shall consist of the following:
002.01 Completed application form (see Appendix C)002.02 A narrative description of the project and method of underground water storage.002.03 Sufficient hydrologic information to identify the extent and scope of the underground water storage and naturally occurring ground water, including, but not limited to: 002.03A A map showing the boundary of the proposed area of recharge. The total number of acres within the boundary shall be labeled.002.03B Water table map showing current water levels.002.03C A narrative evaluating the geologic and hydrologic conditions of the proposed recharge area.002.03D Cross sections of the recharge area showing the geologic and hydrologic conditions.002.03E A list of the registered wells within the proposed recharge area.002.03F A map showing the location of registered wells within the proposed recharge area.002.03G A map showing the location of existing or proposed surface water facilities, including diversion structures, canals, pipelines and recharge pits.002.03H A narrative description of the actual or proposed operation of the surface water project including diversions, deliveries and returns to the river.002.03I If the application is for incidental underground water storage: (1) The historical record of surface water diversions associated with the project;(2) The historical record of any measured returns to the river;(3) A map showing the location and the number of acres actually served by surface water directly delivered by applicant within the last five years;(4) A map showing the location and the number of acres served by water stored underground and not served with surface water directly delivered by applicant within the last five years;(5) A summary of the project's surface water appropriations, including date of priority, the amount of the water appropriation, the use, and location of use, if applicable.457 Neb. Admin. Code, ch. 16, § 002