Section 128-3-008 - Characteristic of corrosivity008.01 A solid waste exhibits the characteristic of corrosivity if a representative sample of the waste has either of the following properties: 008.01A It is aqueous and has a pH less than or equal to 2 or greater than or equal to 12.5, as determined by a pH meter using Method 9040C in "Test Methods for Evaluating Solid Waste, Physical/Chemical Methods" EPA Publication SW-846 as incorporated by reference in Chapter 1, 003.008.01B It is a liquid and corrodes steel (SAE 1020) at a rate greater than 6.35 mm ( 0.250 inch) per year at a test temperature of 55°C (130°F) as determined by Method 1110A in "Test Methods for Evaluating Solid Waste, Physical/Chemical Methods", EPA Publication SW-846 as incorporated by reference in Chapter 1, 003.008.02 A solid waste that exhibits the characteristic of corrosivity has the DEQ/EPA Hazardous Waste Number of D002.128 Neb. Admin. Code, ch. 3, § 008