Section 128-25-014 - Accumulation time limits014.01 A small quantity handler of universal waste may accumulate universal waste for no longer than one year from the date the universal waste is generated, or received from another handler, unless the requirements of 014.02 of this chapter are met.014.02 A small quantity handler of universal waste may accumulate universal waste for longer than one year from the date the universal waste is generated, or received from another handler, if such activity is solely for the purpose of accumulation of such quantities of universal waste as necessary to facilitate proper recovery, treatment, or disposal. However, the handler bears the burden of proving that such activity is solely for the purpose of accumulation of such quantities of universal waste as necessary to facilitate proper recovery, treatment, or disposal. A small quantity handler of universal waste must obtain written approval from NDEQ Waste Management Section prior to the one year accumulation time limit if the one year accumulation time limit is to be exceeded.014.03 A small quantity handler of universal waste who accumulates universal waste must be able to demonstrate the length of time that the universal waste has been accumulated from the date it becomes a waste or is received. The handler may make this demonstration by: 014.03A Placing the universal waste in a container and marking or labeling the container with the earliest date that any universal waste in the container became a waste or was received;014.03B Marking or labeling each individual item of universal waste (e.g., each battery, mercury-containing item, lamp, or electronic item) with the date it became a waste or was received;014.03C Maintaining an inventory system on-site that identifies the date each universal waste became a waste or was received;014.03D Maintaining an inventory system on-site that identifies the earliest date that any universal waste in a group of universal waste items or a group of containers of universal waste became a waste or was received;014.03E Placing the universal waste in a specific accumulation area and identifying the earliest date that any universal waste in the area became a waste or was received; or014.03F Any other method which clearly demonstrates the length of time that the universal waste has been accumulated from the date it becomes a waste or is received.128 Neb. Admin. Code, ch. 25, § 014