122 Neb. Admin. Code, ch. 35, § 007

Current through September 17, 2024

Section 122-35-007

The abandonment plan may include the plugging, abandonment, and restoration procedures as outlined in the sections below.

007.01 Method and materials used to stabilize the well.

007.02 Plugging information shall include but not be limited to:

007.02A The type and number of plugs to be used;

007.02B The method for placement of the plugs by one of the following:

007.02B1 The Balance Method;

007.02B2 The Dump Bailer Method;

007.02B3 The Two Plug Method; or

007.02B4 An alternative method approved by the Director.

007.02C The placement of each plug including the elevation of the top and bottom; and

007.02D The type, grade, and quantity of plugging material to be used.

007.03 Abandonment information shall include but not be limited to:

007.03A The type, grade, and quantity of the abandonment fluid to be used;

007.02B The method for placement of the abandonment fluid; and

007.02C The method and type of surface completion.

007.04 Restoration information shall include but not be limited to:

007.04A The type of restoration to be completed;

007.04B The surface area to be restored; and

007.04C The process for restoration.

122 Neb. Admin. Code, ch. 35, § 007