Rule 24.301.1249 - ALTERATION OR REVISION OF A UNIT BEARING INSIGNIA(1) Any manufacturer or retailer proposing to alter or revise a unit bearing insignia of approval prior to or during the installation shall apply to the bureau. An application shall include: (a) make and model of the unit;(c) bureau insignia number;(d) complete description of the work to be performed, together with plans and specifications when required;(e) location of the unit where work is to be performed;(f) alteration or revision fee as required by; and(g) name and address of the manufacturer or retailer of the unit. (2) Upon completion of the alteration or revision, the applicant shall request the bureau to perform an inspection, and include the applicable fees as required by ARM 24.301.1261.(3) The following changes shall not be considered alterations or revisions:(a) repairs with approved component parts;(b) conversion of listed fuel burning appliances in accordance with the terms of their listing;(c) adjustment and maintenance of equipment; and(d) replacement of equipment in kind.(4) If alterations or revisions made do not meet the requirements of this rule, the bureau shall consider any insignia of approval and related review to be void.Mont. Admin. r. 24.301.1249
NEW, 2024 MAR p. 2223, Eff. 9/21/2024AUTH: 50-60-203, 50-60-401, MCA; IMP: 50-60-203, 50-60-401, 50-60-402, MCA