PURPOSE: The amendment corrects rule citations due to amendments and rescissions of other regulations in 10 CSR 60 and removes outdated rule language and provides clarification on existing regulations.
Appendix A to 10 CSR 60-8.030 Converting MCL Compliance Values for Consumer Confidence Reports
Key
AL = Action Level
MCL = Maximum Contaminant Level
MCLG = Maximum Contaminant Level Goal
MFL = million fibers per Liter mrem/year = millirems per year (a measure of radiation absorbed by the body)
NTU = Nephelometric Turbidity Units
pCi/L = picocuries per Liter (a measure of radioactivity)
ppm = parts per million, or milligrams per Liter (mg/L)
ppb = parts per billion, or micrograms per Liter (µg/L)
ppt = parts per trillion, or nanograms per Liter
ppq = parts per quadrillion, or picograms per Liter
TT = Treatment Technique
Contaminant | MCL in compliance units (mg/L) | Multiply by | MCL in CCR units | MCLG in CCR units |
Microbiological Contaminants | ||||
1. Total Coliform Bacteria * Until March 31, 2016 | (Systems that collect 40 or more samples per month) >5% of monthly samples are positive; (systems that collect fewer than 40 samples per month) 1 positive monthly sample. | (Systems that collect 40 or more samples per month) >5% of monthly samples are positive; (systems that collect fewer than 40 samples per month) 1 positive monthly sample. | 0 | |
---------------- | ---------------- | ---------------- | ---------------- | ---------------- |
Total Coliform Bacteria * Beginning April 1, 2016. | TT | TT | 0 | |
2. Fecal coliform and E. coli. * Until March 31, 2016. | 0 | A routine sample and a repeat sample are total coliform positive, and one is also fecal coliform or E.coli positive. | 0 | |
---------------- | ---------------- | ---------------- | ---------------- | ---------------- |
E. coli. * Beginning April 1, 2016. | Routine and repeat samples are total coliform - positive and either is E coli - positive or system fails to take repeat samples following E coli-positive routine sample or system fails to analyze total coliform -positive repeat sample for E coli. | Routine and repeat samples are total coliform - positive and either is E coli -positive or system fails to take repeat samples following E coli- positive routine sample or system fails to analyze total coliform - positive repeat sample for E. coli | 0 | |
3. Total organic carbon (ppm) | TT | TT | N/A | |
4. Turbidity | TT | TT (NTU) | N/A | |
5. Fecal TT Indicators (enterococci or coliphage) | TT | N/A | ||
Radioactive Contaminants | ||||
6. Beta/photon emitters | 4 mrem/yr | 4 mrem/yr | 0 | |
7. Alpha emitters | 15pCi/L | 15pCi/L | 0 | |
8. Combined radium | 5pCi/L | 5pCi/L | 0 | |
9. Uranium (pCi/L) | 30ug/L | 30 | 0 | |
Inorganic Contaminants | ||||
10. Antimony | 0.006 | 1000 | 6 ppb | 6 |
11. Arsenic | 0.05* | 1000 | 50 ppb* | N/A* |
0.010** | 10 ppb** | Q** | ||
*These arsenic values are effective until Jan. 23,2006. | ||||
**These arsenic values are effective Jan. 23, 2006. | ||||
12. Asbestos | 7 MFL | 7 MFL | 7 | |
13. Barium | 2 | 2 ppm | 2 | |
14. Beryllium | 0.004 | 1000 | 4 ppb | 4 |
15. Bromate (ppb) | 0.010 | 1000 | 10 | 0 |
16. Cadmium | 0.005 | 1000 | 5 ppb | 5 |
17. Chloramines (ppm) | MRDL=4 | MRDL=4 | 4 | |
18. Chlorine (ppm) | MRDL=4 | MRDL=4 | 4 | |
19. Chlorine dioxide (ppb) | MRDL=0.8 | 1000 | MRDL=0.8 | 800 |
20. Chlorite (ppm) | 1 | 1 | 0.8 | |
21. Chromium | 0.1 | 1000 | 100 ppb | 100 |
22. Copper | AL=1.3 | AL=1.3 ppm | 1.3 | |
23. Cyanide | 0.2 | 1000 | 200 ppb | 200 |
24. Fluoride | 4 | 4 ppm | 4 | |
25. Lead | AL=0.015 | 1000 | AL=15 ppb | 0 |
26. Mercury (inorganic) | 0.002 | 1000 | 2 ppb | 2 |
27. Nitrate (as Nitrogen) | 10 | 10 ppm | 10 | |
28. Nitrite (as Nitrogen) | 1 | 1 ppm | 1 | |
29. Selenium | 0.05 | 1000 | 50 ppb | 50 |
30. Thallium | 0.002 | 1000 | 2 ppb | 0.5 |
Synthetic Organic Contaminants Including Pesticides and Herbicides | ||||
31. 2,4-D | 0.07 | 1000 | 70 ppb | 70 |
32. 2,4,5-TP [Silvex] | 0.05 | 1000 | 50 ppb | 50 |
33. Acrylamide | TT | 0 | ||
34. Alachlor | 0.002 | 1000 | 2 ppb | 0 |
35. Atrazine | 0.003 | 1000 | 3 ppb | 3 |
36. Benzo(a)pyrene [PAH] | 0.0002 | 1,000,000 | 200 ppt | 0 |
37. Carbofuran | 0.04 | 1000 | 40 ppb | 40 |
38. Chlordane | 0.002 | 1000 | 2 ppb | 0 |
39. Dalapon | 0.2 | 1000 | 200 ppb | 200 |
40. Di(2-ethylhexyl)adipate | 0.4 | 1000 | 400 ppb | 400 |
41. Di(2-ethylhexyl)phthalate | 0.006 | 1000 | 6 ppb | 0 |
42. Dibromochloropropane | 0.0002 | 1,000,000 | 200 ppt | 0 |
43. Dinoseb | 0.007 | 1000 | 7 ppb | 7 |
44. Diquat | 0.02 | 1000 | 20 ppb | 20 |
45. Dioxin [2,3,7,8-TCDD] | 0.00000003 | 1,000,000,000 | 30 ppq | 0 |
46. Endothall | 0.1 | 1000 | 100 ppb | 100 |
47. Endrin | 0.002 | 1000 | 2 ppb | 2 |
48. Epichlorohydrin | TT | TT | 0 | |
49. Ethylene dibromide | 0.00005 | 1,000,000 | 50 ppt | 0 |
50. Glyphosate | 0.7 | 1000 | 700 ppb | 700 |
51. Heptachlor | 0.0004 | 1,000,000 | 400 ppt | 0 |
52. Heptachlor epoxide | 0.0002 | 1,000,000 | 200 ppt | 0 |
53. Hexachlorobenzene | 0.001 | 1000 | 1 ppb | 0 |
54. Hexachloro-cyclopentadiene | 0.05 | 1000 | 50 ppb | 50 |
55. Lindane | 0.0002 | 1,000,000 | 200 ppt | 200 |
56. Methoxychlor | 0.04 | 1000 | 40 ppb | 40 |
57. Oxamyl [Vydate] | 0.2 | 1000 | 200 ppb | 200 |
58. PCBs [Polychlorinated biphenyls] | 0.0005 | 1,000,000 | 500 ppt | 0 |
59. Pentachlorophenol | 0.001 | 1000 | 1 ppb | 0 |
60. Picloram | 0.5 | 1000 | 500 ppb | 500 |
61. Simazine | 0.004 | 1000 | 4 ppb | 4 |
62. Toxaphene | 0.003 | 1000 | 3 ppb | 0 |
Volatile Organic Contaminants | ||||
63. Benzene | 0.005 | 1000 | 5 ppb | 0 |
64. Carbon tetrachloride | 0.005 | 1000 | 5 ppb | 0 |
65. Chlorobenzene | 0.1 | 1000 | 100 ppb | 100 |
66. o-Dichlorobenzene | 0.6 | 1000 | 600 ppb | 600 |
67. p-Dichlorobenzene | 0.075 | 1000 | 75 ppb | 75 |
68. 1,2-Dichloroethane | 0.005 | 1000 | 5 ppb | 0 |
69. 1,1-Dichloroethylene | 0.007 | 1000 | 7 ppb | 7 |
70. cis-1,2-Dichloroethylene | 0.07 | 1000 | 70 ppb | 70 |
71. trans-1,2-Dichloroethylene | 0.1 | 1000 | 100 ppb | 100 |
72. Dichloromethane | 0.005 | 1000 | 5 ppb | 0 |
73. 1,2-Dichloropropane | 0.005 | 1000 | 5 ppb | 0 |
74. Ethylbenzene | 0.7 | 1000 | 700 ppb | 700 |
75. Haloacetic Acids (HAA) (ppb) | 0.060 | 1000 | 60 | n/a |
76. Styrene | 0.1 | 1000 | 100 ppb | 100 |
77. Tetrachloroethylene | 0.005 | 1000 | 5 ppb | 0 |
78. 1,2,4-Trichlorobenzene | 0.07 | 1000 | 70 ppb | 70 |
79. 1,1,1-Trichloroethane | 0.2 | 1000 | 200 ppb | 200 |
80. 1,1,2-Trichloroethane | 0.005 | 1000 | 5 ppb | 3 |
81. Trichloroethylene | 0.005 | 1000 | 5 ppb | 0 |
82. TTHMs [Total trihalomethanes] | 0.10/.080 | 1000 | 100/80 ppb | n/a |
83. Toluene | 1 | 1 ppm | 1 | |
84. Vinyl Chloride | 0.002 | 1000 | 2 ppb | 0 |
85. Xylenes | 10 | 10 ppm | 10 |
Key
AL=Action Level
MCL=Maximum Contaminant Level
MCLG=Maximum Contaminant Level Goal
MFL=million fibers per Liter mrem/year=millirems per year (a measure of radiation absorbed by the body)
NTU=Nephelometric Turbidity Units
pCi/L=picocuries per Liter (a measure of radioactivity)
ppm=parts per million, or milligrams per Liter (mg/L)
ppb=parts per billion, or micrograms per Liter (µg/L)
ppt=parts per trillion, or nanograms per Liter
ppq=parts per quadrillion, or picograms per Liter
TT=Treatment Technique
Contaminant (units) | MCLG | MCL | Major sources in drinking water |
Microbiological Contaminants | |||
1. Total Coliform Bacteria *Until March 31, 2016. | 0 | (Systems that collect 40 or more samples per month) >5% of monthly samples are positive; (systems that collect fewer than 40 samples per month) 1 positive monthly sample. | Naturally present in the environment. |
--------------------------------------- | ------- | --------------------- | --------------------------------------------------- |
Total Coliform Bacteria *Beginning April 1, 2016. | N/A | TT | Naturally present in the environment. |
2. Fecal coliform and E. coli *Until March 31, 2016. | 0 | A routine sample and a repeat sample are total coliform positive, and one is also fecal coliform or E. coli positive. | Human and animal fecal waste. |
--------------------------------------- | ------- | --------------------- | ---------------------------------------------- |
E. coli *Beginning April 1, 2016 | 0 | TT | Human and animal fecal waste. |
3. Total organic carbon (ppm) | N/A | TT | Naturally present in the environment. |
4. Turbidity | N/A | TT | Soil runoff. |
5. Fecal N/A Indicators (enterococci or coliphage) | TT | Human and animal fecal waste. | |
Radioactive Contaminants | |||
6. Beta/photon emitters (mrem/yr) | 0 | 4 | Decay of natural and man-made deposits. |
7. Alpha emitters (pCi/L) | 0 | 15 | Erosion of natural deposits. |
8. Combined radium (pCi/L) | 0 | 5 | Erosion of natural deposits. |
9. Uranium | 0 | 30 | Erosion of natural deposits. |
Inorganic Contaminants | |||
10. Antimony (ppb) | 6 | 6 | Discharge from petroleum refineries; fire retardants; ceramics; electronics; solder. |
11. Arsenic (ppb) | [N/A1] 0[2] | [501 ] 10[2] | Erosion of natural deposits; Runoff from orchards; Runoff from glass and electronics production wastes. |
[1These arsenic values are effective until Jan. 23, 2006. 2These arsenic values are effective Jan. 23, 2006.] | |||
12. Asbestos (MFL) | 7 | 7 | Decay of asbestos cement water mains; Erosion of natural deposits. |
13. Barium (ppm) | 2 | 2 | Discharge of drilling wastes; Discharge from metal refineries; Erosion of natural deposits. |
14. Beryllium (ppb) | 4 | 4 | Discharge from metal refineries and coal-burning factories; Discharge from electrical, aerospace, and defense industries. |
15. Bromate (ppb) | 0 | 10 | By-product of drinking water disinfection. |
16. Cadmium (ppb) | 5 | 5 | Corrosion of galvanized pipes; Erosion of natural deposits; Discharge from metal refineries; Runoff from waste batteries and paints. |
17. Chloramines (ppm) | MRDLG=4 | MRDL=4 | Water additive used to control microbes. |
18. Chlorine (ppm) | MRDL=4 | MRDL=4 | Water additive used to control microbes |
19. Chlorine dioxide (ppb) | MRDLG=800 | MRDL=800 | Water additive used to control microbes |
20. Chlorite (ppm) | 0.8 | 1 | By-product of drinking water disinfection. |
21. Chromium (ppb) | 100 | 100 | Discharge from steel and pulp mills; Erosion of natural deposits. |
22. Copper (ppm) | 1.3 | AL=1.3 | Corrosion of household plumbing systems; Erosion of natural deposits. |
23. Cyanide (ppb) | 200 | 200 | Discharge from steel/metal factories; Discharge from plastic and fertilizer factories. |
24. Fluoride (ppm) | 4 | 4 | Erosion of natural deposits; Water additive which promotes strong teeth; Discharge from fertilizer and aluminum factories. |
25. Lead (ppb) | 0 | AL=15 | Corrosion of household plumbing systems; Erosion of natural deposits. |
26. Mercury [inorganic] (ppb) | 2 | 2 | Erosion of natural deposits; Discharge from refineries and factories; Runoff from landfills; Runoff from cropland. |
27. Nitrate [as Nitrogen] (ppm) | 10 | 10 | Runoff from fertilizer use; Leaching from septic tanks, sewage; Erosion of natural deposits. |
28. Nitrite [as Nitrogen] (ppm) | 1 | 1 | Runoff from fertilizer use; Leaching from septic tanks, sewage; Erosion of natural deposits. |
29. Selenium (ppb) | 50 | 50 | Discharge from petroleum and metal refineries; Erosion of natural deposits; Discharge from mines. |
30. Thallium (ppb) | 0.5 | 2 | Leaching from ore-processing sites; Discharge from electronics, glass, and drug factories. |
Synthetic Organic Contaminants Including Pesticides and Herbicides | |||
31. 2,4-D (ppb) | 70 | 70 | Runoff from herbicide used on row crops. |
32. 2,4,5-TP [Silvex] (ppb) | 50 | 50 | Residue of banned herbicide. |
33. Acrylamide | 0 | TT | Added to water during sewage/wastewater treatment. |
34. Alachlor (ppb) | 0 | 2 | Runoff from herbicide used on row crops. |
35. Atrazine (ppb) | 3 | 3 | Runoff from herbicide used on row crops. |
36. Benzo(a)pyrene [PAH] (nanograms/[l]L) | 0 | 200 | Leaching from linings of water storage tanks and distribution lines. |
37. Carbofuran (ppb) | 40 | 40 | Leaching of soil fumigant used on rice and alfalfa. |
38. Chlordane (ppb) | 0 | 2 | Residue of banned termiticide. |
39. Dalapon (ppb) | 200 | 200 | Runoff from herbicide used on rights of way. |
40. Di(2-ethylhexyl)adipate (ppb) | 400 | 400 | Discharge from chemical factories. |
41. Di(2-ethylhexyl)phthalate (ppb) | 0 | 6 | Discharge from rubber and chemical factories. |
42. Dibromochloropropane (ppt) | 0 | 200 | Runoff/leaching from soil fumigant used on soybeans, cotton, pineapples, and orchards. |
43. Dinoseb (ppb) | 7 | 7 | Runoff from herbicide used on soybeans and vegetables. |
44. Diquat (ppb) | 20 | 20 | Runoff from herbicide use. |
45. Dioxin [2,3,7,8-TCDD] (ppq) | 0 | 30 | Emissions from waste incineration and other combustion; Discharge from chemical factories. |
46. Endothall (ppb) | 100 | 100 | Runoff from herbicide use. |
47. Endrin (ppb) | 2 | 2 | Residue of banned insecticide. |
48. Epichlorohydrin | 0 | TT | Discharge from industrial chemical factories; An impurity of some water treatment chemicals. |
49. Ethylene dibromide (ppt) | 0 | 50 | Discharge from petroleum refineries. |
50. Glyphosate (ppb) | 700 | 700 | Runoff from herbicide use. |
51. Heptachlor (ppt) | 0 | 400 | Residue of banned termiticide. |
52. Heptachlor epoxide (ppt) | 0 | 200 | Breakdown of heptachlor. |
53. Hexachlorobenzene (ppb) | 0 | 1 | Discharge from metal refineries and agricultural chemical factories. |
54. Hexachlorocyclopentadiene (ppb) | 50 | 50 | Discharge from chemical factories. |
55. Lindane (ppt) | 200 | 200 | Runoff/leaching from insecticide used on cattle, lumber, gardens. |
56. Methoxychlor (ppb) | 40 | 40 | Runoff/leaching from insecticide used on fruits, vegetables, alfalfa, and livestock. |
57. Oxamyl [Vydate] (ppb) | 200 | 200 | Runoff/leaching from insecticide used on apples, potatoes, and tomatoes. |
58. PCBs [Polychlorinated biphenyls] (ppt) | 0 | 500 | Runoff from landfills; Discharge of waste chemicals. |
59. Pentachlorophenol (ppb) | 0 | 1 | Discharge from wood preserving factories. |
60. Picloram (ppb) | 500 | 500 | Herbicide runoff. |
61. Simazine (ppb) | 4 | 4 | Herbicide runoff. |
62. Toxaphene (ppb) | 0 | 3 | Runoff/leaching from insecticide used on cotton and cattle. |
Volatile Organic Contaminants | |||
63. Benzene (ppb) | 0 | 5 | Discharge from factories; Leaching from gas storage tanks and landfills. |
64. Carbon tetrachloride (ppb) | 0 | 5 | Discharge from chemical plants and other industrial activities. |
65. Chlorobenzene (ppb) | 100 | 100 | Discharge from chemical and agricultural chemical factories. |
66. o-Dichlorobenzene (ppb) | 600 | 600 | Discharge from industrial chemical factories. |
67. p-Dichlorobenzene (ppb) | 75 | 75 | Discharge from industrial chemical factories. |
68. 1,2-Dichloroethane (ppb) | 0 | 5 | Discharge from industrial chemical factories. |
69. 1,1-Dichloroethylene (ppb) | 7 | 7 | Discharge from industrial chemical factories. |
70. cis-1,2-Dichloroethylene (ppb) | 70 | 70 | Discharge from industrial chemical factories. |
71. trans-1,2-Dichloroethylene (ppb) | 100 | 100 | Discharge from industrial chemical factories. |
72. Dichloromethane (ppb) | 0 | 5 | Discharge from pharmaceutical and chemical factories. |
73. 1,2-Dichloropropane (ppb) | 0 | 5 | Discharge from industrial chemical factories. |
74. Ethylbenzene (ppb) | 700 | 700 | Discharge from petroleum refineries. |
75. Haloacetic Acids (HAA) (ppb) | n/a | 60 | By-product of drinking water disinfection. |
76. Styrene (ppb) | 100 | 100 | Discharge from rubber and plastic factories; Leaching from landfills. |
77. Tetrachloroethylene (ppb) | 0 | 5 | Discharge from factories and dry cleaners. |
78. 1,2,4-Trichlorobenzene (ppb) | 70 | 70 | Discharge from textile-finishing factories. |
79. 1,1,1-Trichloroethane (ppb) | 200 | 200 | Discharge from metal degreasing sites and other factories. |
80. 1,1,2-Trichloroethane (ppb) | 3 | 5 | Discharge from industrial chemical factories. |
81. Trichloroethylene (ppb) | 0 | 5 | Discharge from metal degreasing sites and other factories. |
82. TTHMs [Total trihalomethanes] (ppb) | n/a | 100/80 | By-product of drinking water disinfection. |
83. Toluene (ppm) | 1 | 1 | Discharge from petroleum factories. |
84. Vinyl Chloride (ppb) | 0 | 2 | Leaching from PVC piping; Discharge from plastics factories. |
85. Xylenes (ppm) | 10 | 10 | Discharge from petroleum factories; Discharge from chemical factories. |
Appendix C to 10 CSR 60-8.030
Health Effects Language
Microbiological Contaminants
Radioactive Contaminants
Inorganic Contaminants
Synthetic Organic Contaminants Including Pesticides and Herbicides
Volatile Organic Contaminants
A system that detects arsenic at levels above 0.005 mg/L and up to and including 0.01 mg/L must include in its report a short informational statement about arsenic, using language such as: "While your drinking water meets EPA's standard for arsenic, it does contain low levels of arsenic. EPA's standard balances the current understanding of arsenic's possible health effects against the costs of removing arsenic from drinking water. EPA continues to research the health effects of low levels of arsenic, which is a mineral known to cause cancer in humans at high concentrations and is linked to other health effects such as skin damage and circulatory problems." The system may write its own educational statement, but only in consultation with the department.
Appendix A to 10 CSR 60-8.030 Converting MCL Compliance Values for Consumer Confidence Reports Key
AL = Action Level
MCL = Maximum Contaminant Level
MCLG = Maximum Contaminant Level Goal
MFL = million fibers per liter
mrem/year = millirems per year (a measure of radiation absorbed by the body)
NTU = Nephelometric Turbidity Units
pCi/L = picocuries per liter (a measure of radioactivity)
ppm = parts permillion, or milligrams per liter (mg/L)
ppb = parts per billion, or micrograms liter ([MICRO]g/L)
ppt = parts per trillion' or nanograms per liter,.
ppq = parts per quadrillion, or picograms per liter
TT = Treatment Technique
Contaminant | MCL in compliance units (mg/L) | multiply by | MCL in CCR units | MCLG in CCR units |
Microbiological Contaminants | ||||
1. Total Coliform Bacteria | (Systems that collect 40 or more samples per month) >5% of monthly samples are positive; (systems that collect fewer than 40 samples per month) 1 positive monthly sample. | (Systems that collect 40 or more samples per month) >5% of monthly samples are positive; (systems that collect fewer than 40 samples per month) 1 positive monthly sample. | 0 | |
2. Fecal coliform and E. coli | 0 | A routine sample and a repeat sample are total coliform positive, and one is also fecal coliform or E. coli positive. | 0 | |
3. Total organic carbon (ppm) | TT | TT | N/A | |
4. Turbidity | TT | TT (NTU) | N/A | |
5. Fecal TT Indicators (enterococci or coliphage) | TT | N/A | ||
Radioactive Contaminants | ||||
6. Beta/photon emitters | 4 mrem/yr | 4 mrem/yr | 0 | |
7. Alpha emitters | 15 pCi/L | 15 pCi/L | 0 | |
8. Combined radium | 5 pCi/L | 5 pCi/L | 0 | |
9. Uranium (pCi/L) | 30[MICRO]g/L | 30 | 0 | |
Inorganic Contaminants | ||||
10. Antimony | .006 | 1000 | 6 ppb | 6 |
11. Arsenic | 0.05* | 1000 | 50 ppb* | N/A* |
0.010** | 10 ppb** | 0** | ||
*These arsenic values are effective until Jan. 23, 2006. **These arsenic values are effective Jan. 23, 2006. | ||||
12. Asbestos | 7 MFL | 7 MFL | 7 | |
13. Barium | 2 | 2 ppm | 2 | |
14. Beryllium | 0.004 | 1000 | 4 ppb | 4 |
15. Bromate (ppb) | 0.010 | 1000 | 10 | 0 |
16. Cadmium | 0.005 | 1000 | 5 ppb | 5 |
17. Chloramines (ppm) | MRDL=4 | MRDL=4 | 4 | |
18. Chlorine (ppm) | MRDL=4 | MRDL=4 | 4 | |
19. Chlorine dioxide (ppb) | MRDL = .8 | 1000 | MRDL=.8 | 800 |
20. Chlorite (ppm) | 1 | 1 | 0.8 | |
21. Chromium | 0.1 | 1000 | 100 ppb | 100 |
22. Copper | AL=1.3 | AL = 1.3 ppm | 1.3 | |
23. Cyanide | 0.2 | 1000 | 200 ppb | 200 |
24. Fluoride | 4 | 4 ppm | 4 | |
25. Lead | AL=.015 | 1000 | AL = 15 ppb | 0 |
26. Mercury (inorganic) | 0.002 | 1000 | 2 ppb | 2 |
27. Nitrate (as Nitrogen) | 10 | 10 ppm | 10 | |
28. Nitrite (as Nitrogen) | 1 | 1 ppm | 1 | |
29. Selenium | 0.05 | 1000 | 50 ppb | 50 |
30. Thallium | 0.002 | 1000 | 2 ppb | 0.5 |
Synthetic Organic Contaminants Including Pesticides and Herbicides | ||||
31. 2,4-D | 0.07 | 1000 | 70 ppb | 70 |
32. 2,4,5-TP [Silvex] | 0.05 | 1000 | 50 ppb | 50 |
33. Acrylamide | TT | 0 | ||
34. Alachlor | 0.002 | 1000 | 2 ppb | 0 |
35. Atrazine | 0.003 | 1000 | 3 ppb | 3 |
36. Benzo(a)pyrene [PAH] | 0.0002 | 1,000,000 | 200 ppt | 0 |
37. Carbofuran | 0.04 | 1000 | 40 ppb | 40 |
38. Chlordane | 0.002 | 1000 | 2 ppb | 0 |
39. Dalapon | 0.2 | 1000 | 200 ppb | 200 |
40. Di(2-ethylhexyl)adipate | 0.4 | 1000 | 400 ppb | 400 |
41. Di(2-ethylhexyl)phthalate | 0.006 | 1000 | 6 ppb | 0 |
42. Dibromochloropropane | 0.0002 | 1,000,000 | 200 ppt | 0 |
43. Dinoseb | 0.007 | 1000 | 7 ppb | 7 |
44. Diquat | 0.02 | 1000 | 20 ppb | 20 |
45. Dioxin [2,3,7,8-TCDD] | 0.00000003 | 1,000,000,000 | 30 ppq | 0 |
46. Endothall | 0.1 | 1000 | 100 ppb | 100 |
47. Endrin | 0.002 | 1000 | 2 ppb | 2 |
48. Epichlorohydrin | TT | TT | 0 | |
49. Ethylene dibromide | 0.00005 | 1,000,000 | 50 ppt | 0 |
50. Glyphosate | 0.7 | 1000 | 700 ppb | 700 |
51. Heptachlor | 0.0004 | 1,000,000 | 400 ppt | 0 |
52. Heptachlor epoxide | 0.0002 | 1,000,000 | 200 ppt | 0 |
53. Hexachlorobenzene | 0.001 | 1000 | 1 ppb | 0 |
54. Hexachloro-cyclopentadiene | 0.05 | 1000 | 50 ppb | 50 |
55. Lindane | 0.0002 | 1,000,000 | 200 ppt | 200 |
56. Methoxychlor | 0.04 | 1000 | 40 ppb | 40 |
57. Oxamyl [Vydate] | 0.2 | 1000 | 200 ppb | 200 |
58. PCBs [Polychlorinated biphenyls] | 0.0005 | 1,000,000 | 500 ppt | 0 |
59. Pentachlorophenol | 0.001 | 1000 | 1 ppb | 0 |
60. Picloram | 0.5 | 1000 | 500 ppb | 500 |
61. Simazine | 0.004 | 1000 | 4 ppb | 4 |
62. Toxaphene | 0.003 | 1000 | 3 ppb | 0 |
Volatile Organic Contaminants | ||||
63. Benzene | 0.005 | 1000 | 5 ppb | 0 |
64. Carbon tetrachloride | 0.005 | 1000 | 5 ppb | 0 |
65. Chlorobenzene | 0.1 | 1000 | 100 ppb | 100 |
66. o-Dichlorobenzene | 0.6 | 1000 | 600 ppb | 600 |
67. p-Dichlorobenzene | 0.075 | 1000 | 75 ppb | 75 |
68. 1,2-Dichloroethane | 0.005 | 1000 | 5 ppb | 0 |
69. 1,1-Dichloroethylene | 0.007 | 1000 | 7 ppb | 7 |
70. cis-1,2-Dichloroethylene | 0.07 | 1000 | 70 ppb | 70 |
71. trans-1,2-Dichloroethylene | 0.1 | 1000 | 100 ppb | 100 |
72. Dichloromethane | 0.005 | 1000 | 5 ppb | 0 |
73. 1,2-Dichloropropane | 0.005 | 1000 | 5 ppb | 0 |
74. Ethylbenzene | 0.7 | 1000 | 700 ppb | 700 |
75. Haloacetic Acids (HAA) (ppb) | 0.060 | 1000 | 60 | n/a |
76. Styrene | 0.1 | 1000 | 100 ppb | 100 |
77. Tetrachloroethylene | 0.005 | 1000 | 5 ppb | 0 |
78. 1,2,4-Trichlorobenzene | 0.07 | 1000 | 70 ppb | 70 |
79. 1,1,1-Trichloroethane | 0.2 | 1000 | 200 ppb | 200 |
80. 1,1,2-Trichloroethane | 0.005 | 1000 | 5 ppb | 3 |
81. Trichloroethylene | 0.005 | 1000 | 5 ppb | 0 |
82. TTHMs [Total trihalomethanes] | 0.10/.080 | 1000 | 100/80 ppb | n/a |
83. Toluene | 1 | 1 ppm | 1 | |
84. Vinyl Chloride | 0.002 | 1000 | 2 ppb | 0 |
85. Xylenes | 10 | 10 ppm | 10 |
Appendix B to 10 CSR 60-8.030
Regulated Contaminants
Key
AL=Action Level
MCL=Maximum Contaminant Level
MCLG=Maximum Contaminant Level Goal
MFL=million fibers per liter
mrem/year=millirems per year (a measure of radiation absorbed by the body)
NTU=Nephelometric Turbidity Units
pCi/L=picocuries per liter (a measure of radioactivity)
ppm=parts per million, or milligrams per liter (mg/L)
ppb=parts per billion, or micrograms per liter ([MICRO]g/L)
ppt=parts per trillion, or nanograms per liter
ppq=parts per quadrillion, or picograms per liter
TT=Treatment Technique
Contaminant (units) | MCLG | MCL | Major sources in drinking water |
Microbiological Contaminants | |||
1. Total Coliform Bacteria | 0 | (Systems that collect 40 or more samples per month) >5% of monthly samples are positive; (systems that collect fewer than 40 samples per month) 1 positive monthly sample. | Naturally present in the environment. |
2. Fecal coliform and E. coli | 0 | A routine sample and a repeat sample are total coliform positive, and one is also fecal coliform or E. coli positive. | Human and animal fecal waste. |
3. Total organic carbon (ppm) | N/A | TT | Naturally present in the environment. |
4. Turbidity | N/A | TT | Soil runoff. |
5. Fecal N/A Indicators (enterococci or coliphage) | TT | Human and animal fecal waste. | |
Radioactive Contaminants | |||
6. Beta/photon emitters (mrem/yr) | 0 | 4 | Decay of natural and man-made deposits. |
7. Alpha emitters (pCi/L) | 0 | 15 | Erosion of natural deposits. |
8. Combined radium (pCi/L) | 0 | 5 | Erosion of natural deposits. |
9. Uranium | 0 | 30 | Erosion of natural deposits. |
Inorganic Contaminants | |||
10. Antimony (ppb) | 6 | 6 | Discharge from petroleum refineries; fire retardants; ceramics; electronics; solder. |
11. Arsenic (ppb) | N/A1 02 | 501 102 | Erosion of natural deposits; Runoff from orchards; Runoff from glass and electronics production wastes. |
1These arsenic values are effective until Jan. 23, 2006. 2These arsenic values are effective Jan. 23, 2006. | |||
12. Asbestos (MFL) | 7 | 7 | Decay of asbestos cement water mains; Erosion of natural deposits. |
13. Barium (ppm) | 2 | 2 | Discharge of drilling wastes; Discharge from metal refineries; Erosion of natural deposits. |
14. Beryllium (ppb) | 4 | 4 | Discharge from metal refineries and coal-burning factories; Discharge from electrical, aerospace, and defense industries. |
15. Bromate (ppb) | 0 | 10 | By-product of drinking water disinfection. |
16. Cadmium (ppb) | 5 | 5 | Corrosion of galvanized pipes; Erosion of natural deposits; Discharge from metal refineries; Runoff from waste batteries and paints. |
17. Chloramines (ppm) | MRDLG = 4 | MRDL=4 | Water additive used to control microbes. |
18. Chlorine (ppm) | MRDL=4 | MRDL=4 | Water additive used to control microbes |
19. Chlorine dioxide (ppb) | MRDLG = 800 | MRDL = 800 | Water additive used to control microbes |
20. Chlorite (ppm) | 0.8 | 1 | By-product of drinking water disinfection. |
21. Chromium (ppb) | 100 | 100 | Discharge from steel and pulp mills; Erosion of natural deposits. |
22. Copper (ppm) | 1.3 | AL=1.3 | Corrosion of household plumbing systems; Erosion of natural deposits. |
23. Cyanide (ppb) | 200 | 200 | Discharge from steel/metal factories; Discharge from plastic and fertilizer factories. |
24. Fluoride (ppm) | 4 | 4 | Erosion of natural deposits; Water additive which promotes strong teeth; Discharge from fertilizer and aluminum factories. |
25. Lead (ppb) | 0 | AL=15 | Corrosion of household plumbing systems; Erosion of natural deposits. |
26. Mercury [inorganic] (ppb) | 2 | 2 | Erosion of natural deposits; Discharge from refineries and factories; Runoff from landfills; Runoff from cropland. |
27. Nitrate [as Nitrogen] (ppm) | 10 | 10 | Runoff from fertilizer use; Leaching from septic tanks, sewage; Erosion of natural deposits. |
28. Nitrite [as Nitrogen] (ppm) | 1 | 1 | Runoff from fertilizer use; Leaching from septic tanks, sewage; Erosion of natural deposits. |
29. Selenium (ppb) | 50 | 50 | Discharge from petroleum and metal refineries; Erosion of natural deposits; Discharge from mines. |
30. Thallium (ppb) | 0.5 | 2 | Leaching from ore-processing sites; Discharge from electronics, glass, and drug factories. |
Synthetic Organic Contaminants Including Pesticides and Herbicides | |||
31. 2,4-D (ppb) | 70 | 70 | Runoff from herbicide used on row crops. |
32. 2,4,5-TP [Silvex] (ppb) | 50 | 50 | Residue of banned herbicide. |
33. Acrylamide | 0 | TT | Added to water during sewage/wastewater treatment. |
34. Alachlor (ppb) | 0 | 2 | Runoff from herbicide used on row crops. |
35. Atrazine (ppb) | 3 | 3 | Runoff from herbicide used on row crops. |
36. Benzo(a)pyrene [PAH] (nanograms/l) | 0 | 200 | Leaching from linings of water storage tanks and distribution lines. |
37. Carbofuran (ppb) | 40 | 40 | Leaching of soil fumigant used on rice and alfalfa. |
38. Chlordane (ppb) | 0 | 2 | Residue of banned termiticide. |
39. Dalapon (ppb) | 200 | 200 | Runoff from herbicide used on rights of way. |
40. Di(2-ethylhexyl)adipate (ppb) | 400 | 400 | Discharge from chemical factories. |
41. Di(2-ethylhexyl)phthalate (ppb) | 0 | 6 | Discharge from rubber and chemical factories. |
42. Dibromochloropropane (ppt) | 0 | 200 | Runoff/leaching from soil fumigant used on soybeans, cotton, pineapples, and orchards. |
43. Dinoseb (ppb) | 7 | 7 | Runoff from herbicide used on soybeans and vegetables. |
44. Diquat (ppb) | 20 | 20 | Runoff from herbicide use. |
45. Dioxin [2,3,7,8-TCDD] (ppq) | 0 | 30 | Emissions from waste incineration and other combustion; Discharge from chemical factories. |
46. Endothall (ppb) | 100 | 100 | Runoff from herbicide use. |
47. Endrin (ppb) | 2 | 2 | Residue of banned insecticide. |
48. Epichlorohydrin | 0 | TT | Discharge from industrial chemical factories; An impurity of some water treatment chemicals. |
49. Ethylene dibromide (ppt) | 0 | 50 | Discharge from petroleum refineries. |
50. Glyphosate (ppb) | 700 | 700 | Runoff from herbicide use. |
51. Heptachlor (ppt) | 0 | 400 | Residue of banned termiticide. |
52. Heptachlor epoxide (ppt) | 0 | 200 | Breakdown of heptachlor. |
53. Hexachlorobenzene (ppb) | 0 | 1 | Discharge from metal refineries and agricultural chemical factories. |
54. Hexachlorocyclopentadiene (ppb) | 50 | 50 | Discharge from chemical factories. |
55. Lindane (ppt) | 200 | 200 | Runoff/leaching from insecticide used on cattle, lumber, gardens. |
56. Methoxychlor (ppb) | 40 | 40 | Runoff/leaching from insecticide used on fruits, vegetables, alfalfa, and livestock. |
57. Oxamyl [Vydate] (ppb) | 200 | 200 | Runoff/leaching from insecticide used on apples, potatoes, and tomatoes. |
58. PCBs [Polychlorinated biphenyls] (ppt) | 0 | 500 | Runoff from landfills; Discharge of waste chemicals. |
59. Pentachlorophenol (ppb) | 0 | 1 | Discharge from wood preserving factories. |
60. Picloram (ppb) | 500 | 500 | Herbicide runoff. |
61. Simazine (ppb) | 4 | 4 | Herbicide runoff. |
62. Toxaphene (ppb) | 0 | 3 | Runoff/leaching from insecticide used on cotton and cattle. |
Volatile Organic Contaminants | |||
63. Benzene (ppb) | 0 | 5 | Discharge from factories; Leaching from gas storage tanks and landfills. |
64. Carbon tetrachloride (ppb) | 0 | 5 | Discharge from chemical plants and other industrial activities. |
65. Chlorobenzene (ppb) | 100 | 100 | Discharge from chemical and agricultural chemical factories. |
66. o-Dichlorobenzene (ppb) | 600 | 600 | Discharge from industrial chemical factories. |
67. p-Dichlorobenzene (ppb) | 75 | 75 | Discharge from industrial chemical factories. |
68. 1,2-Dichloroethane (ppb) | 0 | 5 | Discharge from industrial chemical factories. |
69. 1,1-Dichloroethylene (ppb) | 7 | 7 | Discharge from industrial chemical factories. |
70. cis-1,2-Dichloroethylene (ppb) | 70 | 70 | Discharge from industrial chemical factories. |
71. trans-1,2-Dichloroethylene (ppb) | 100 | 100 | Discharge from industrial chemical factories. |
72. Dichloromethane (ppb) | 0 | 5 | Discharge from pharmaceutical and chemical factories. |
73. 1,2-Dichloropropane (ppb) | 0 | 5 | Discharge from industrial chemical factories. |
74. Ethylbenzene (ppb) | 700 | 700 | Discharge from petroleum refineries. |
75. Haloacetic Acids (HAA) (ppb) | n/a | 60 | By-product of drinking water disinfection. |
76. Styrene (ppb) | 100 | 100 | Discharge from rubber and plastic factories; Leaching from landfills. |
77. Tetrachloroethylene (ppb) | 0 | 5 | Discharge from factories and dry cleaners. |
78. 1,2,4-Trichlorobenzene (ppb) | 70 | 70 | Discharge from textile-finishing factories. |
79. 1,1,1-Trichloroethane (ppb) | 200 | 200 | Discharge from metal degreasing sites and other factories. |
80. 1,1,2-Trichloroethane (ppb) | 3 | 5 | Discharge from industrial chemical factories. |
81. Trichloroethylene (ppb) | 0 | 5 | Discharge from metal degreasing sites and other factories. |
82. TTHMs [Total trihalomethanes] (ppb) | n/a | 100/80 | By-product of drinking water disinfection. |
83. Toluene (ppm) | 1 | 1 | Discharge from petroleum factories. |
84. Vinyl Chloride (ppb) | 0 | 2 | Leaching from PVC piping; Discharge from plastics factories. |
85. Xylenes (ppm) | 10 | 10 | Discharge from petroleum factories; Discharge from chemical factories. |
Appendix C to 10 CSR 60-8.030 Health Effects Language
Microbiological Contaminants
Radioactive Contaminants
Inorganic Contaminants
Synthetic Organic Contaminants Including Pesticides and Herbicides
Volatile Organic Contaminants
10 CSR 60-8.030
*Original authority: 640.100, RSMo 1939, amended 1978, 1981, 1982, 1988, 1989, 1992, 1993, 1995, 1996, 1998, 1999, 2002, 2006 and 640.125, RSMo 1978, amended 1998.