Mo. Code Regs. tit. 10 § 30-6.020
Current through Register Vol. 49, No. 18, September 16, 2024
Section 10 CSR 30-6.020 - Map Accuracy StandardsPURPOSE: This rule prescribes minimum acceptable mapping standards.
(1) Horizontal Accuracy. (A) Class I. The root mean square (rms) error of a map product shall be less than 0.01 of one inch (1") on the map or in the case of a metric map, 0.025 of one centimeter (1 cm) on the map. EXAMPLE (Customary Units)
| Limiting rms |
| Scale | Value in Feet |
| 1"= 20' | 0.2' |
| 1"= 50' | 0.5' |
| 1"= 100' | 1.0' |
| 1"= 200' | 2.0' |
| 1"= 400' | 4.0' |
| 1"=1000' | 10.0' |
| 1"=2000' | 20.0' |
EXAMPLE (SI Units)
| Scale | Limiting rms Value in Meters |
| 1 cm= 5m | 0.125 |
| 1 cm= 10m | 0.250 |
| 1 cm=100m | 2.50 |
| 1 cm=200m | 5.00 |
(B) Class II. The rms shall be twice that required for Class I.(C) Class III. The rms shall be three (3) times that required for Class I.(2) Vertical Accuracy. (A) Class I. For Class I maps rms error in elevation shall be less than one-third (1/3) of the indicated contour interval for well-defined points only, and one-sixth (1/6) of the contour interval for spot heights.(B) Class II. The rms error may be twice that required for Class I.(C) Class III. The rms error may be three (3) times that required for Class I.(3) Mixed Accuracy. A map may be compiled that complies with one (1) class of accuracy in elevation and another in planimetry. AUTHORITY: Section 60.510(7), RSMo 1986.* Original rule filed May 3, 1994, effective 12/30/1994. *Original authority: 60.510, RSMo 1984.