Section 35-5-06-01-105 - Equipment Control1. The calibration module of the weigh scale is to be sealed at all times by a seal of such a nature to prevent tampering, for example, a metal strip, prenumbered labels, lock and key. A person independent of the slot department is notified and present at any time the seal is broken.2. The weigh scale shall be tested by someone independent of the slot department and count team at least on a quarterly basis. The results of this test must be fully documented and maintained on file by the licensee.3. A metered count machine shall be tested prior to the actual count to ascertain if the metering device is working properly by using a predetermined number of coins of each denomination.35 Miss. Code. R. § 5-06-01-105