Rule 30-901-14.3 - Seal on Documents1. The seal, signature and date on a document constitute a certification that the document was prepared by the licensee or under his direct supervision.2.a. Each sheet of plans, drawings, documents, specifications and reports for engineering practice and of maps, plats, charts shall be signed, sealed and dated by the licensee preparing them, prepared under his direct supervisory control, or reviewed by him in sufficient depth to fully coordinate and assume responsibility for documents prepared by another professional engineer.b. Each sheet of maps, plats, charts, documents, and reports for land surveying practice shall be signed, sealed, and dated by the licensee preparing them or prepared under his direct supervisory control.3. Where more than one sheet is bound together in one volume, the licensee who prepared such volume, or under whose direction and control such volume was prepared, may sign, seal and date only the title or index sheet, providing that the signed sheet clearly identifies all of the other sheets comprising the bound volume, and provided that any of the other sheets which were prepared by, or under the direction and control of, another licensee, be signed, and/or sealed and dated by said other licensee.4. Additions, deletions or other revisions affecting public health and safety or state and local codes may be made only if they are subsequently signed, sealed and dated by the licensee who made the revisions or under whose direction and control said revisions were made.30 Miss. Code. R. 901-14.3
Miss. Code Ann. § 73-13-15