30 Miss. Code. R. 201-3.4
Upon official notification of registration, the architect shall secure an official seal or rubber stamp for use in this state. Seals are to be circular in form and 1 1/2 inches in diameter. A copy of the design is shown, and shall contain the following information:
Name, registration number, and the words "Registered Architect State of Mississippi".
A sample of the seal impression or rubber stamp imprint shall be furnished to the Board within sixty (60) days of the date shown on the Official Notice of Registration letter. The architect's license shall not be considered active, thus practice will not be allowed, until the Board or its designee has received and approved the architect's seal. Failure to provide proof of seal shall result in disciplinary action by the Board.
Architects may continue to use seals obtained prior to the adoption of this rule, which are in conformance with prior Board rules. All seals obtained subsequent to the adoption of this rule shall strictly conform to the requirements herein set forth.
It is the responsibility of the registrant to comply with the requirements for use of the seal.
30 Miss. Code. R. 201-3.4