Miss. Code. tit. 2, pt. 1, subpt. 4, ch. 08, B100 and Biodiesel/Petroleum Diesel Fuel Blends, BBD100 and Biomass-Based Diesel/Petroleum Diesel Fuel Blends, tbl. 1
Property | Test Method a | B21 - B80 S15 | B21 - B80 S500 |
Acid Number, mg KOH/g, max | ASTM D 664 | 0.7 | 0.7 |
Kinematic Viscosity mm 2/s at 104 oF | ASTM D 445 | 2.0-6.0 | 2.0-6.0 |
Flash Point oF, min | ASTM D 93 | 125 b | 125 b |
Alcohol Content % mass max | EN 14110 | 0.20 | 0.20 |
Oxidation Stability hrs, min | EN 14112 | 6 | 6 |
Copper Corrosion Max | ASTM D 130 | No. 3 | No. 3 |
Water and Sediments Volume % max | ASTM D 2709 | 0.05 | 0.05 |
Cetane Number | ASTM D613 | 42 | 42 |
Cloud Point | ASTM D 2500 | Report | Report |
Cold Filter Plugging Point | ASTM D 6371 | Report | Report |
Sulfur Content, (µg/g) max Mass % max | ASTM D 7039 ASTM D 4294 | 15 | 0.05 |
Ramsbottom Carbon Residueon 10% Bottoms, mass % max | ASTM D 524 | 0.35 | 0.35 |
% Biodiesel | FTIR | 21-80 | 21-80 |
a The indicated test methods are the approved referee methods inMississippi. Other acceptable substitute methods are accepted if approved by ASTM.
bIf grade No. 1-D or blends of Grade No. 1-D and grade no.2-D diesel fuel are used, the minimum flash point shall be 100 oF.
Miss. Code. tit. 2, pt. 1, subpt. 4, ch. 08, B100 and Biodiesel/Petroleum Diesel Fuel Blends, BBD100 and Biomass-Based Diesel/Petroleum Diesel Fuel Blends, tbl. 1