Rule 15-10-76-3.4.8 - Blowoff Equipment1. The blowdown from a boiler or boilers that enters a sewer system or blowdown which is considered a hazard to life or property shall pass through some form of blowoff equipment that will reduce pressure and temperature as required hereinafter.2. The temperature of the water leaving the blowoff valve equipment shall not exceed 150ø F.3. The pressure of the blowdown leaving any type of blowoff equipment shall not exceed 5 psig.4. The blowoff piping and fittings between the boiler and the blowoff tank shall comply with Section I of the ASME Code.5. All materials used in the fabrication of boiler blowoff equipment shall comply with Section II of the ASME Code.6. All blowoff equipment shall be fitted with openings to facilitate cleaning and inspection.7. Blowoff equipment shall conform to the provisions set forth in the National Board of Boiler and Pressure Vessel Inspectors' publication, "Boiler Blowoff Equipment."15 Miss. Code. R. 10-76-3.4.8
Miss. Code Ann. § 45-23-9