Rule 11-2-2.7 - Emissions Evaluation ReportWhere emissions evaluation reporting is required in any permit, acceptable mathematical methods to demonstrate control adequacy shall include but not be limited to the following:
A. An emission inventory including: (1) location and description of control equipment at each point source;(2) determination of all possible pollutants at each point source (characteristics, conditions, particle size distribution, etc.);(3) listing of all stack parameters at each point of emission; and(4) detailed description of input material (e.g., percent sulfur content, percent moisture, average BTU heating value, input rate, etc.); andB. A detailed engineering report including: (1) sufficient calculations to demonstrate uncontrolled emissions;(2) sufficient calculations to support or show design efficiency of control equipment;(3) sufficient calculations to demonstrate controlled emissions; and(4) comparison of calculated controlled emissions with the applicable emission standards as set forth in 11 Miss. Admin. Code Pt. 2, Ch. 1.Miss. Code Ann. §§ 49-2-9 (1)(b), 49-17-17, 49-17-28, 49-17-29, 49-17-30, 49-2-1, et seq. and 49-17-1, et seq.