Minn. R. agency 167, ch. 7001, HAZARDOUS WASTE FACILITY PERMITS, pt. 7001.0635
Current through Register Vol. 49, No. 24, December 9, 2024
Part 7001.0635 - SPECIFIC PART B INFORMATION REQUIREMENTS FOR AIR EMISSION CONTROLS FOR TANKS, SURFACE IMPOUNDMENTS, AND CONTAINERS Except as otherwise provided in part 7045.0450, owners and operators of tanks, surface impoundments, or containers that use air emission controls in accordance with the requirements of part 7045.0540 must provide the additional information described in items A to G.
A. Documentation for each floating roof cover installed on a tank subject to Code of Federal Regulations, title 40, section 264.1084(d)(1) or (d)(2), as incorporated in part 7045.0540, that includes information prepared by the owner or operator or provided by the cover manufacturer or vendor describing the cover design, and certification by the owner or operator that the cover meets the applicable design specifications under Code of Federal Regulations, title 40, section 264.1084(e)(1) or (f)(1), as incorporated in part 7045.0540.B. Identification of each container area subject to the requirements of part 7045.0540 and certification by the owner or operator that the requirements of this part are met.C. Documentation for each enclosure used to control air pollutant emissions from tanks or containers in accordance with the requirements of Code of Federal Regulations, title 40, section 264.1084(d)(5) or 264.1086(e)(1)(ii), as incorporated in part 7045.0540, that includes records for the most recent set of calculations and measurements performed by the owner or operator to verify that the enclosure meets the criteria of a permanent total enclosure as specified in "Procedure T - Criteria for and Verification of a Permanent or Temporary Total Enclosure" under Code of Federal Regulations, title 40, section 52.741, Appendix B, as amended.D. Documentation for each floating membrane cover installed on a surface impoundment in accordance with the requirements of Code of Federal Regulations, title 40, section 264.1085(c), as incorporated in part 7045.0540, that includes information prepared by the owner or operator or provided by the cover manufacturer or vendor describing the cover design, and certification by the owner or operator that the cover meets the specifications under Code of Federal Regulations, title 40, section 264.1085(c)(1), as incorporated in part 7045.0540.E. Documentation for each closed-vent system and control device installed in accordance with the requirements of Code of Federal Regulations, title 40, section 264.1087, as incorporated in part 7045.0540, that includes design and performance information as specified in Code of Federal Regulations, title 40, section 270.24(c) and (d), as amended.F. An emission monitoring plan for both Code of Federal Regulations, title 40, part 60, Appendix A, Method 21, as amended, and control device monitoring methods. This plan shall include the following information: monitoring points, monitoring methods for control devices, monitoring frequency, procedures for documenting exceedances, and procedures for mitigating noncompliances.G. The schedule of implementation required under Code of Federal Regulations, title 40, section 265.1082, as incorporated in part 7045.0645, when an owner or operator of a facility subject to part 7045.0645 cannot comply with part 7045.0540 by the date of permit issuance.Minn. R. agency 167, ch. 7001, HAZARDOUS WASTE FACILITY PERMITS, pt. 7001.0635
Statutory Authority: MS s 116.07