Minn. R. agency 151, ch. 1350, CONSTRUCTION SEALS AND LABELS, pt. 1350.0900
Each replacement construction seal shall be assigned and affixed to a specific manufactured home. Assigned replacement construction seals are not transferable and are void when not affixed as assigned, and all voided replacement construction seals or original HUD labels shall be returned to, or may be confiscated by, the commissioner.
The replacement construction seal shall be securely affixed to the rear of the manufactured home on the lower left corner of the exterior wall.
Only one installation seal shall be assigned to a manufactured home whether the manufactured home consists of one or multiple units. The installation seal shall be placed in a readily visible location adjacent to the primary label or construction seal. Appropriate installation seals shall be affixed to each accessory structure.
Each accessory structure seal shall be assigned and affixed to a specific accessory structure. Assigned accessory structure seals are not transferable and are void when not affixed as assigned, and all such accessory structure seals shall be returned to, or may be confiscated by, the commissioner. The accessory structure seal shall remain the property of the commissioner and may be reappropriated by the commissioner in the event of violation of the conditions of approval. Multiple unit accessory structures shall be assigned and bear consecutively serial numbered accessory structure seals.
The accessory structure seal shall be securely affixed in a readily visible location.
Minn. R. agency 151, ch. 1350, CONSTRUCTION SEALS AND LABELS, pt. 1350.0900
Statutory Authority: MS s 326B.02; 326B.101; 326B.106; 326B.13; 327.32; 327.33; 327B.01 to 327B.12