Minn. R. agency 151, ch. 1350, CONSTRUCTION SEALS AND LABELS, pt. 1350.0500
United States Department of Housing and Urban Development labels are acquired by the manufacturer from the secretary pursuant to the act.
A person may qualify for replacement seals by furnishing proof on forms furnished by the commissioner that the manufactured home to which the seal or label was affixed was manufactured in compliance with the State or Federal Manufactured Home Building Code and has not been brought out of conformance because of damage, additions, or alterations.
Any manufacturer of accessory structures shall qualify for acquisition of an accessory structure seal by obtaining plan approval pursuant to parts 1350.1300 to 1350.2000 and quality control approval pursuant to part 1350.3500.
Application for installer licensing shall be issued by the Department of Labor and Industry as required by Minnesota Statutes, section 326B.83. Installer license verification must be submitted as supporting evidence to the commissioner of labor and industry to establish that installation seals issued to an installer will be affixed only to those manufactured homes where the support system and ground anchoring system installations comply with parts 1350.0100 to 1350.6900, applicable State Building Code provisions, or federal installation standards. The State Building Code provisions or federal installation standards that apply to the installation are dependent upon the date that the home was manufactured.
Any licensed installer shall qualify for acquisition of installation seals by providing proof of licensure in good standing that has been issued by the commissioner or a reciprocal manufactured home licensing program in another state or federal jurisdiction of the United States that has been approved by the commissioner.
Minn. R. agency 151, ch. 1350, CONSTRUCTION SEALS AND LABELS, pt. 1350.0500
Statutory Authority: MS s 326B.02; 326B.101; 326B.106; 326B.13; 327.32; 327.33; 327B.01 to 327B.12