Minn. R. agency 144, ch. 4626, EQUIPMENT DESIGN AND CONSTRUCTION, pt. 4626.0570
Current through Register Vol. 49, No. 20, November 12, 2024
Part 4626.0570 - EQUIPMENT OPENINGS, CLOSURES, AND DEFLECTORS. 4-204.12A. A cover or lid for equipment must overlap the opening and be sloped to drain.B. An opening located within the top of a unit of equipment that is designed for use with a cover or lid must be flanged upward at least 2/10 inch (5 millimeters).C. Except as specified in item D, fixed piping, temperature measuring devices, rotary shafts, and other parts extending into equipment must be provided with a watertight joint at the point where the item enters the equipment.D. If a watertight joint is not provided:(1) the piping, temperature measuring devices, rotary shafts, and other parts extending through the openings must be equipped with an apron designed to deflect condensation, drips, and dust from openings into the food; and(2) the opening shall must be flanged as specified in item B.Minn. R. agency 144, ch. 4626, EQUIPMENT DESIGN AND CONSTRUCTION, pt. 4626.0570
Statutory Authority: MS s 31.101; 31.11; 144.05; 144.08; 144.12; 157.011