Current through Register Vol. 48, No. 51, June 17, 2024
Part 7855.0300 - PROPOSED FUEL CONVERSION FACILITY; DESCRIPTION Each application for a fuel conversion facility shall contain the following information:
A. a physical description of the facility, including: (1) its location, to the fullest extent known;(2) an estimate of the required land area and the height of the tallest structures;(3) its design capacity in tons per hour of input material;(4) a schematic drawing showing major components of the facility; and(5) a map showing the planned location of the facility and its interconnections with energy transportation systems;B. data regarding design and construction of the facility, including:(1) if known, the complete name and business address of the engineer and firm that would be responsible for the design of the facility;(2) if known, the complete name and business address of the company that would construct the facility;(3) the proposed date for commencing construction and the proposed in-service date;(4) the estimated installed cost of the facility in current dollars; and(5) the estimated economic life of the facility; andC. data regarding operation of the facility, including: (1) a narrative description of the steps of the process;(2) the types and sources of input materials that would be processed by the facility and the estimated energy content of each in Btu per appropriate unit of measure;(3) the types of output products, the amount of each, and the estimated energy content of each in Btu per appropriate unit of measure;(4) the projected annual operating and maintenance costs in current dollars for each of the first five calendar years of operation;(5) a description of the methods that would be used to transport input and output materials to and from the facility;(6) the estimated amounts and types of energy products that would be consumed during operation at the design capacity;(7) the expected average percentage of use of the full design capacity for each of the first five calendar years of operation; and(8) a discussion of the maintenance requirements of the facility, including the estimated impact on production.Statutory Authority: MS s 216B.08; 216B.2421; 216B.243; 216C.10