Minn. R. agency 133, ch. 8230, PROCEDURES FOR CENTRAL COUNT OPTICAL SCAN VOTING SYSTEMS, pt. 8230.2030

Current through Register Vol. 49, No. 19, November 4, 2024

Part 8230.2030 - POLLING PLACE PROCEDURES

A. At the polling place after voting hours have ended, the election judges shall open the ballot box, remove the ballots, and determine the total number of ballots in the box. If the number of ballots is greater than the number of persons voting and it is impossible to reconcile the numbers, the ballots must be replaced in the ballot box and one of the election judges shall publicly draw out a number of ballots equal to the excess. The excess ballots must be marked "excess" and placed in an envelope. The envelope then must be sealed. The judges shall write "excess ballots" on the outside of the envelope and put it in the transfer case. A notation of the pertinent facts must be made on the incident report. If the number of ballots counted is less than the number of persons voting, the reason for the discrepancy must be noted in the incident report. If the judges are unable to explain the discrepancy, they shall so state in the incident report.

B. The election judges must identify ballots that will need to be duplicated at the central counting center or process ballots requiring duplication prior to transporting them to the central counting center. Ballots requiring duplication must be duplicated as provided in part 8230.3850.

23 SR 459

Statutory Authority: MS s 206.57; 206.81