The intent of the MX Mixed Use District is to foster vital commercial streets that serve the needs of surrounding neighborhoods and the Capitol campus, and to encourage pedestrian-oriented and transit-supportive development along these corridors.
MX MIXED USE DISTRICT
Building and Parking Example
Building Height Measurement Example
Examples of Typical Buildings in the MX District
The following minimum setbacks apply to building placement in the MX district:
Principal Building | Minimum Setback |
Front yard | See frontage map |
Corner side yard | Zero feet interior |
Side yard | 10 feet adjacent to residential use |
Rear yard | Zero feet |
Buildings accessory to nonresidential uses must meet the same setback requirements as principal buildings.
Buildings accessory to residential uses must meet the setback requirements of the RM district.
These building types, described in part 2400.2500 are considered appropriate for the MX district. Other building types are acceptable upon approval by the zoning administrator, provided that they meet the lot, height, and frontage requirements and design standards of this chapter.
Building Type | Minimum Lot Width |
Civic building | 60 feet |
Commercial block building | 35 feet |
Podium building | 60 feet |
Parking building | 60 feet |
Liner building | 60 feet |
Single-family detached | 35 feet |
Two-family twin | 25 feet |
Two-family duplex | 35 feet |
Townhouse | 20 feet |
Small apartment (3-4 units) | 40 feet |
Large apartment (5 plus units) | 50 feet |
Carriage house | Not applicable |
Lot area and coverage requirements in the MX district are as follows:
Building Type | Minimum Lot Size |
Nonresidential or mixed use | None |
Single-family detached | 5,000 square feet |
Two-family (per unit) | 3,000 square feet |
Townhouse (per unit) | 2,400 square feet |
Multifamily (per unit) | 1,200 square feet |
Maximum impervious coverage | 85 percent of lot area |
Building heights in the MX district must comply with part 2400.2300.
Minn. R. agency 118, ch. 2400, pt. 2400.2225
Statutory Authority: MS s 15B.06