Section R. 408.7003 - Applicability of national standardsRule 3. The following standards are adopted by reference.
(a) The following standards are available from the American Society of Mechanical Engineers (ASME), 22 Law Drive, Box 2900, Fairfield, New Jersey 07007-2900, https://www.asme.org, at a cost as of the time of adoption of these rules, as stated in this subdivision: (i) ASME A17.1- 2016 safety code for elevators and escalators, except for sections, 1.2.1(b), 1.2.1(c), 2.5.1.5.3, 2.8.3.3.2, 2.8.6, 2.11.1.3, 2.11.1.4, 2.11.7.2, 2.11.7.2.1, 2.11.7.2.2, 2.11.7.2.3, 2.11.7.2.4, 2.11.7.2.5, 2.12.7.2.1(c), 2.12.7.2.2, 2.14.2.2(f), 2.14.2.6, 2.14.5.9.2, 2.22.2, 2.27.3.1.6(c), 3.18.3.8.3, 3.19.5.2, 3.22.1.6, 5.3.1.1.1, 5.3.1.1.2, 5.3.1.2.1, 5.3.1.14.3, 5.4.10.1, 5.4.10.2, 5.11, 5.12, 5.12.1, 5.12.1.1, 5.12.1.2, 5.12.1.3, 5.12.1.4, 5.12.2, 5.12.3, 8.6.1.7.1, 8.6.4.19.12 (b), 8.6.4.20.1(b), 8.6.4.20.1(b)(1), 8.6.4.20.1(b)(2), 8.6.4.20.3(a)(2), 8.6.4.20.3 (2)(b), 8.6.4.20.3 (g), 8.6.4.20.4 (b), 8.6.4.20.4 (b)(1), 8.6.4.20.4 (b)(2), 8.6.4.20.10(b), 8.6.4.20.10(b)(1), 8.6.4.20.10(b)(2), 8.6.5.8, 8.6.7.11 to 8.6.7.11.3, 8.6.7.12, 8.6.7.12.1, 8.6.7.12.2, 8.6.11.5 to 8.6.11.5.6, 8.6.11.10 to 8.6.11.10.4, 8.7.2.14.5.2, 8.10.1.1.3, 8.10.1.2, 8.11.1.1, 8.11.1.1.1, 8.11.1.1.2, 8.11.5.14 to 8.11.5.16. Cost $252.00.(ii) ASME A17.2- 2017 guide for inspection of elevators, escalators, and moving walks. Cost $195.00.(iii) ASME A17.3-2017 safety code for existing elevators and escalators. Cost $168.00.(iv) ASME A17.6- 2017 standard for elevator suspension, compensation, and governor systems. Cost $92.00.(v) ASME A18.1- 2017 safety code standard for platform lifts and stairway chairlifts, except for sections 2.1.2 to 2.1.2.8, 2.1.3 to 2.1.3.10, 3.10.2 to 3.10.2.4, 10.1.1, 10.1.2 to 10.1.2.3, 10.1.3.3, 10.1.4, and 10.2.1. Cost $98.00.(vi) ASME A90.1-2009 safety standard for belt manlifts. Cost $59.00.(b) ANSI A10.4-2016, the American National Standards Institute (ANSI), safety requirements for personnel hoist and employee elevators for construction and demolition and operations, except for sections 24.1.2.1 and 26.4.8.1, is available from ANSI at 1430 Broadway, New York, New York, 10018, https://www.ansi.org. Cost $110.00.(c) The following standards are available from American Society for Testing and Materials, (ASTM), 100 Bar Harbor Drive, 2 Conshohocken, Pennsylvania 19428-2959, at a cost as of the time of adoption of these rules, as stated in this subdivision: (i) ASTM D 2667-2008, standard test method for biodegradability of alkylbenzene sulfonates. Cost $69.00.(ii) ASTM E 648-2010, 'standard test method for critical radiant flux of floor-covering systems using a radiant heat energy source'. Cost $69.00.(iii) ASTM F 714-2012, 'standard specification for polyethylene (PE) plastic pipe (SDR-PR) based on outside diameter'. Cost $69.00.(d) The standards adopted in this subrule are also available for inspection at the Michigan Department of Licensing and Regulatory Affairs, Bureau of Construction Codes, 611 W. Ottawa St., 1st Floor Ottawa Building, Lansing, Michigan 48933. Direction to the organizations' website to order the book may be obtained from the bureau of construction codes. The cost of the individual codes is noted in this subrule.(e) All references to NFPA 70 mean the current Michigan electrical code. The Michigan electrical code is available for inspection at the Michigan Department of Licensing and Regulatory Affairs, Bureau of Construction Codes 611 W. Ottawa St., 1st Floor Ottawa Building, Lansing, Michigan 48933, at a cost as of the time of adoption of these amendatory rules of $89.50.Mich. Admin. Code R. 408.7003
2003 AACS; 2005 AACS; 2010 AACS; 2014 AACS.; 2023 MR 6, Eff. 3/29/2023