Mich. Admin. Code R. 408.14261

Current through Vol. 24-21, December 1, 2024
Section R. 408.14261 - Trim presses

Rule 4261.

(1) A trim press shall be provided with a main disconnect switch as prescribed in R 408.14247(1).
(2) A trim press shall be provided with a safety block or prop as prescribed in R 408.14243. Die design shall take into consideration and provide a suitable flat area in the die for locating and using blocking material.
(3) A trim press shall be fed by devices as prescribed in R 408.14251(10).

Mich. Admin. Code R. 408.14261

1979 AC