Section R. 408.12708 - Definitions; R to TRule 2708.
(1) "Radial saw" means a machine with a circular blade suspended from a horizontal arm which is pulled through the material.(2) "Revolving tool lathe" means a lathe where revolving multiple cutters shape cut revolving stock held between 2 points.(3) "Router" means a machine with a revolving vertical cutter and a motor suspended over a table and used to cut to a predetermined design.(4) "Run" means the distance from pulley to pulley.(5) "Swing saw" means a machine suspended above a table and equipped with a circular blade which swings forward from an overhead pivot point.(6) "Tenoner" means a machine equipped with horizontal and vertical circular blades to cut tenons and perform trimming operations.Mich. Admin. Code R. 408.12708