Current through Vol. 24-19, November 1, 2024
Section R. 408.43207 - Permits; trainingRule 3207.
(1) An employer shall provide the operator of an aerial work platform with an aerial work platform permit.(2) The requirements of subrule (8)(a), (b), (c), and (d) of this rule shall be met before an employee is issued a permit.(3) A permit shall be carried by the operator or be available at the job site and shall be displayed upon request by a department of licensing and regulatory affairs representative.(4) A permit shall indicate the type of aerial work platforms an operator has been trained on and is qualified to operate.(5) A permit to operate an aerial work platform is valid only when performing work for the employer who issued the permit. A permit shall be issued for a period of not more than 3 years.(6) A permit shall contain all of the following information (see sample permit): (c) Name of issuing authority. (Authorized by)(d) The following types of aerial work platform the operator is authorized to operate: (i) Vehicle-mounted elevating work platform such as the following: (A) Extensible boom aerial devices.(C) Actuating boom aerial devices.(ii) Manually propelled elevating work platforms.(iii) Boom-supported elevating work platforms.(iv) Self-propelled elevating work platforms.(8) An employer shall provide each employee who will operate the aerial work platform with instruction and training regarding the equipment before a permit is issued or reissued. Such instruction and training shall ensure that each operator is in compliance with the minimum following provisions: (a) Is instructed by a qualified person in the intended purpose and function of each of the controls.(b) Is trained by a qualified person or reads and understands the manufacturers or owners operating instructions and safety rules.(c) Understands by reading or by having a qualified person explain, all decals, warnings, and instructions displayed on the aerial work platform.(d) Reads and understands the provisions of this subrule and subrules (1) to (7) and (9) of this rule or be trained by a qualified person on their content.(9) The manufacturers operating instructions and safety rules shall be provided and maintained in a legible manner on each unit by the employer.Mich. Admin. Code R. 408.43207
1992 AACS; 2013 MR 8, Eff. April 29, 2013