Section R. 408.43001 - Adoption of standards by referenceRule 3001.
(1) The federal Occupational Safety and Health Administration (OSHA) regulation 29 CFR 1910.268 "Telecommunications," as amended November 18, 2016, is adopted by reference in these rules, except as noted in this rule.(2) The subrules 29 CFR 1910.268(a)(2)(i) and (a)(3) are excepted.(3) The words "for purposes of 29 CFR 1910.34," as used in 29 CFR 1910.268(b)(1)(iii), are excepted.(4) A reference to § 1910.110 "Storage and handling of liquefied petroleum gases," means General Industry Safety Standard Part 56. "Storage and Handling of Liquefied Petroleum Gases," as referenced in R 408.43006.(5) A reference to the "Assistant Secretary for Occupational Safety and Health" means the director of the department of licensing and regulatory affairs.(6) A reference to § 1910.137, "Electrical protective devices," means General Industry Safety and Health Standard Part 33. "Personal Protective Equipment," as referenced in R 408.43006.(7) A reference to "subpart D" means General Industry Safety and Health Standard Part 2. "Walking-Working Surfaces," as referenced in R 408.43006.(8) A reference to § 1910.25(c)(5) means R 408.43004 "Trolley and side-rolling ladders."(9) A reference to § 1910.133 means Construction Safety and Health Standard Part 6. "Personal Protective Equipment," as referenced in R 408.43006.(10) A reference to "subpart Q" means Construction Safety Standard Part 7. "Welding and Cutting," as referenced in R 408.43006.(11) A reference to "subpart W of part 1926" means Construction Safety Standard Part 13. "Mobile Equipment," as referenced in R 408.43006.(12) A reference to § 1910.97, means Occupational Health Standard Part 382. "Nonionizing Radiation," as referenced in R 408.43006.(13) American National Standards Institute Standard ANSI A92.2, "Vehicle-Mounted Elevating and Rotating Devices," 1969 edition, which is referenced in 29 CFR 1910.268, which is adopted by reference in these rules.(14) A reference to American National Standards Institute Standard ANSI B30.6 "Safety Code for Derricks," 1969 edition, means American Society of Mechanical Engineers Standard ASME B30.6 "Safety Code for Derricks," 1969 edition, which is adopted by reference in these rules.(15) A reference to ANSI Z89.2 "Industrial Protective Helmets for Electrical Workers," 1971 edition, which is referenced in 29 CFR 1910.268, is adopted by reference in these rules.(16) A reference to American Society for Testing and Materials Standard ASTM B117, "Standard Practice for Operating Salt Spray (Fog) Apparatus," 1964 edition, which is referenced in 29 CFR 1910.268, is adopted by reference in these rules.(17) A reference to ANSI J6.6 - 1971 edition, means ASTM D120 "Standard Specification for Rubber Insulating Gloves," 1977 edition, which is adopted by reference in these rules.(18) The adopted federal regulations have the same force and effect as a rule promulgated under the Michigan occupational safety and health act, 1974 PA 154, MCL 408.1001 to 408.1094.Mich. Admin. Code R. 408.43001
1979 AC; 2005 AACS; 2013 AACS; 2017 AACS; 2019 MR 12, Eff. 6/26/2019