Section R. 324.815 - Class II permit modificationsRule 815.
(1) Modifications to a Class II permit issued pursuant to R 324.206 may be considered major modifications and subject to requirements of R 324.802 and R 324.803. Minor modifications are not subject to requirements of R 324.802 and R 324.803.(2) Minor modifications include activities such as the following:(a) Correcting typographical errors.(b) Requiring more frequent monitoring or reporting by the permittee.(c) Changing an interim compliance date in a schedule of compliance, provided the new date is not more than 120 days after the date specified in the existing permit and does not interfere with attainment of the final compliance date requirement.(d) Change in ownership or operational control of a facility where the supervisor determines that no other change in the permit is necessary.(e) Changing quantities or types of fluids injected which are within the capacity of the facility as permitted and, in the judgment of the supervisor, would not interfere with the operation of the facility or its ability to meet conditions described in the permit and would not change its classification.(f) Changes in construction requirements approved by the supervisor or authorized representative of the supervisor, including remedial cementing or adding perforations to the approved injection interval.(g) Amendment of a plugging and abandonment plan when approved by the supervisor or authorized representative of the supervisor.(3) The provisions of this rule are effective only upon the date of primacy.Mich. Admin. Code R. 324.815
2018 MR 11, Eff. 6/7/2018