Current through Vol. 24-19, November 1, 2024
Section R. 325.10601a - Compliance with standards to be determined in accordance with monitoring requirements; analytical results to be performed by certified laboratoriesRule 601a.
(1) Compliance with the drinking water standards specified in this part shall be determined in accordance with the monitoring requirements in part 7 of these rules.(2) Analytical results that are used to determine compliance with state drinking water standards established in this part shall be performed by department or EPA-certified or provisionally certified laboratories, except that measurements for alkalinity, bromide, calcium, daily chlorite samples at the entrance to the distribution system, conductivity, magnesium, orthophosphate, pH, residual disinfectant concentration, silica, specific ultraviolet absorbance, temperature, and turbidity may be performed by personnel acceptable to the department.Mich. Admin. Code R. 325.10601a
1993 AACS; 1998-2000 AACS; 2009 AACS