Md. Code Regs. 36.04.01.32

Current through Register Vol. 51, No. 22, November 1, 2024

Section 36.04.01.32 - Manufacturer Storage of Equipment, Systems, and Software Outside a Facility

A. A manufacturer may not utilize a location outside of a facility to store or repair equipment, systems, software, or related parts and inventory for use in a facility without the storage facility being:

(1) Inspected by the Commission; and

(2) Approved in writing by the Commission.

B. A manufacturer shall locate a storage facility in Maryland in a location or locations that reasonably permit the delivery of the support and technical services to which the manufacturer is obligated.

C. A manufacturer shall submit to the Commission a written request to utilize a storage facility under §A of this regulation which includes, at a minimum:

(1) The address;

(2) A physical description of the storage facility;

(3) Specifications for the surveillance system that has been or will be installed at the proposed storage facility including:

(a) If digital:

(i) Recording frames per second; and

(ii) Common image rate; and

(b) Proposed recording retention schedule; and

(4) Security procedures for the storage facility.

Md. Code Regs. 36.04.01.32

Regulations .32 adopted as an emergency provision effective March 1, 2013 (40:6 Md. R. 470)