Md. Code Regs. 26.13.07.02-10

Current through Register Vol. 51, No. 25, December 13, 2024

Section 26.13.07.02-10 - Specific Information Requirements for Solid Waste Management Units

A. In addition to complying with the requirements of Regulation .02 of this chapter, a person seeking a CHS facility permit shall provide the Secretary with the following information for each solid waste management unit at the facility:

(1) The location of the unit on the topographic map required under Regulation .02D(35) of this chapter;

(2) Designation of type of unit;

(3) General dimensions and structural description along with any available drawings;

(4) When the unit was operated;

(5) Specification of all wastes that have been managed at the unit, to the extent available; and

(6) All available information pertaining to any release of hazardous wastes or hazardous constituents from the unit.

B. The permit applicant shall conduct and provide the results of sampling and analysis of ground water, land surface and subsurface strata, surface water, or air, which may include the installation of wells, when the Secretary ascertains it is necessary to complete an assessment that will determine if a more complete investigation is necessary.

Md. Code Regs. 26.13.07.02-10