Md. Code Regs. 26.11.35.02

Current through Register Vol. 51, No. 19, September 20, 2024

Section 26.11.35.02 - Incorporation by Reference

A. In this chapter, the following documents are incorporated by reference.

B. Documents Incorporated.

(1) SCAQMD Method 304-91 Determination of Volatile Organic Compounds in Various Materials (Revised February 1996).

(2) ASTM Designation: ASTM D 4457-85 (Reapproved 1996) Standard Test Method for Determination of Dichloromethane and 1,1,1-Trichloroethane in Paints and Coatings by Direct Injection into a Gas Chromatograph.

(3) ASTM Designation: ASTM E 260-91 Standard Practice for Gas Column Chromatography.

(4) ASTM Designation: ASTM E 260-96 (Reapproved 2006) Standard Practice for Gas Column Chromatography.

(5) ASTM Designation: ASTM D 3792-79 Standard Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph.

(6) ASTM Designation: ASTM D 3792-86 Standard Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph.

(7) ASTM Designation: ASTM D 2879-86 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope.

(8) EPA Technical Document "Guidelines for Determining Capture Efficiency", issued January 9, 1995 ( 40 CFR Part 51 Appendix M).

(9) CARB Method 100 Procedures for Continuous Gaseous Emission Stack Sampling (Amended July 28, 1997).

(10) SCAQMD "General Test Method for Determining Solvent Losses from Spray Gun Cleaning Systems", dated October 3, 1989.

(11) SCAQMD Method 316A-92 Determination of Volatile Organic Compounds in Materials Used for Pipes and Fittings (Revised October 1996).

Md. Code Regs. 26.11.35.02

Regulations .02 adopted as an emergency provision effective January 11, 2008 (35:3 Md. R. 287); adopted permanently effective April 21, 2008 (35:8 Md. R. 809)