Md. Code Regs. 26.11.30.06

Current through Register Vol. 51, No. 18, September 6, 2024

Section 26.11.30.06 - Sulfur Compounds

A. Sulfur Dioxide (SO₂).

(1) Areas I, II, V, and VI. In Areas I, II, V, and VI, an owner or operator of a cement manufacturing installation may not cause emissions into the atmosphere with an SO₂ concentration greater than 2,000 ppm for sources constructed before January 17, 1972, or 500 ppm for sources constructed on or after January 17, 1972.

(2) Areas III and IV. In Areas III and IV, an owner or operator of a cement manufacturing installation may not cause emissions into the atmosphere with an SO₂ concentration greater than 2,000 ppm for sources constructed before February 21, 1971, or 500 ppm for sources constructed on or after February 21, 1971.

B. Sulfuric Acid and Sulfur Trioxide.

(1) Areas I, II, V, and VI. In Areas I, II, V, and VI, an owner or operator of a cement manufacturing installation may not cause emissions of sulfuric acid, sulfur trioxide, or any combination of them, in excess of 70 milligrams per cubic meter reported as sulfuric acid, for any source constructed before January 17, 1972, or 35 milligrams per cubic meter reported as sulfuric acid, for any source constructed on or after January 17, 1972.

(2) Areas III and IV. In Areas III and IV, an owner or operator of a cement manufacturing installation may not cause emissions of sulfuric acid, sulfur trioxide, or any combination of them, in excess of 70 milligrams per cubic meter reported as sulfuric acid for any source constructed before February 21, 1971, or 35 milligrams per cubic meter reported as sulfuric acid for any source constructed on or after February 21, 1971.

C. All calculations of emissions for §§A and B of this regulation shall be adjusted to standard conditions and 7 percent oxygen.

Md. Code Regs. 26.11.30.06

Regulation .06 adopted effective 42:14 Md. R. 884, eff.7/20/2015