Md. Code Regs. 26.11.24.01-1

Current through Register Vol. 51, No. 12, June 14, 2024

Section 26.11.24.01-1 - Incorporation by Reference

A. In this chapter, the following CARB approved test methods are incorporated by reference.

B. Test Methods Incorporated.

(1) Vapor Recovery Test Procedure TP-201.3 Determination of 2 Inch WC Static Pressure Performance of Vapor Recovery Systems of Dispensing Facilities, amended March 17, 1999.

(2) Vapor Recovery Test Procedure TP-201.5 Determination (By Volume Meter) of Air to Liquid Volume Ratio of Vapor Recovery Systems of Dispensing Facilities, adopted April 12, 1996.

(3) Vapor Recovery Test Procedures TP-201.4 Determination of Dynamic Pressure Performance of Vapor Recovery Systems of Dispensing Facilities, amended April 28, 2000.

(4) Executive Order G-70-186, Exhibit 4, Vapor Return Line Vacuum Integrity Test for the Healy Model 400 ORVR System.

(5) Executive Order G-70-165, Exhibit 4, Vapor Return Line Vacuum Integrity Test for the Healy Model 600 System.

(6) Leak Rate and Cracking Pressure of Pressure/Vacuum Valves TP-201.1E.

(7) Determination of Vapor Piping Connections to Underground Gasoline Storage Tanks (Tie-Tank Test) TP-201.3C 1999.

(8) "Recommended Practices for Installation and Testing of Vapor Recovery Systems at Vehicle Refueling Sites" of the Petroleum Equipment Institute, Section 14, 2009.

Md. Code Regs. 26.11.24.01-1

Regulation .01-1 adopted effective April 15, 2002 (29:7 Md. R. 623)
Regulation .01-1 amended effective 42:23 Md. R. 1435, eff.11/23/2015