Md. Code Regs. 26.04.06.43

Current through Register Vol. 51, No. 12, June 14, 2024

Section 26.04.06.43 - Marginal Land - Permit Application Requirements

A. A person shall submit to the Department a separate Sewage Sludge Utilization Permit Application for each site where sewage sludge is to be applied on a marginal land, subject to the following:

(1) Adjacent properties owned and operated by separate persons shall be considered as separate sites; and

(2) Nonadjacent parcels of land that are owned or operated by the same person, as evidenced by a farm plan or other documentation acceptable to the Department, may be considered a single site if the distance between the parcels is 3 miles or less.

B. A person shall submit to the Department six completed copies of the Sewage Sludge Utilization Permit Application on a form provided by the Department. A person shall also submit a performance bond, liability insurance, or other form of security required under the provisions of Regulation .10 of this chapter.

C. The Sewage Sludge Utilization Permit Application to apply sewage sludge on a marginal land shall include six completed copies of the owner's consent form provided by the Department completed and signed by the legal owners of the site where sewage sludge is to be applied and dated not more than 6 months before the receipt of the Sewage Sludge Utilization Permit Application by the Department.

D. The Sewage Sludge Utilization Permit Application to apply sewage sludge on a marginal land shall include six completed copies of the following information:

(1) The sources and types of sewage sludge to be applied, including any treatment the sewage sludge has received, such as anaerobic digestion, aerobic digestion, lime stabilization, composting, or dewatering;

(2) A current site specific topographic map with a minimum scale of 1 inch = 200 feet and a contour interval of not more than 5 feet showing the areal extent of the site, the property boundary lines, fields boundaries, and the proximity of the site to major roads in the area and any roads on the site;

(3) A current site plan that includes:

(a) The location of property boundary lines and field boundaries;

(b) The exact acreage where sewage sludge is to be applied;

(c) The location of all buffer distances;

(d) The location of any residences or buildings on site or within 1/2 mile of the site;

(e) An inventory of any domestic, commercial, or municipal wells on site and within 1/2 mile of the property boundary lines, including water level for the wells if available;

(f) The location of any on-site stream, spring, seep, pond, drainage ditch or other body of water;

(g) The location of any on-site area with a slope of 15 percent or greater;

(h) The location of any on-site bedrock outcropping;

(i) The location of any on-site depression area;

(j) The surrounding land uses;

(k) The location of cation exchange capacity tests and pH testing of the soil;

(l) The location of all soil tests, and the location of all soil borings or test pits on the site;

(m) Other features as determined by the Department; and

(n) A legend identifying the key features on the site plan;

(4) Representative analysis of the pH of the soils;

(5) A description of representative test borings or test pits on the site including a description of the texture of the soils encountered and the depth to the groundwater;

(6) Unless the analytical results have been submitted to the Department in accordance with the requirements of Regulation .06 of this chapter, the most recent results of a laboratory analysis of a representative composite sample of the sewage sludge that was obtained from the wastewater treatment plant that generated the sewage sludge, subject to the following requirements:

(a) The sample was obtained in accordance with the requirements of Regulation .06 of this chapter;

(b) The analysis of the sample was performed by an independent laboratory or other laboratory acceptable to the Department, using standards, procedures, and methods that are acceptable to the Department;

(c) If requested by the Department, the results shall be accompanied by a description of the method or methods of analysis; and

(d) The analytical results include, at a minimum:

(i) Percent of total solids, pH, ammonium nitrogen, nitrate nitrogen, total phosphorous, total potassium, total arsenic, total cadmium, total copper, total lead, total mercury, total molybdenum, total nickel, total selenium, total zinc, polychlorinated biphenyls (PCBs), and the dry weight concentration of total Kjeldahl nitrogen; and

(ii) Any other sewage sludge constituent that the Department determines necessary to adequately assess the potential impact of the project on public health and the environment;

(7) A loading calculation per acre for the sewage sludge proposal;

(8) Sediment and erosion control provisions approved by the appropriate approving authority;

(9) The type of crop to be grown with a calculation of the amount of seed mixture to be used per acre, the proposed optimal soil pH for the type of crop to be grown, and the desired yield of the crop;

(10) A tax map showing the property line, owner, acreage, and liber and folio numbers;

(11) A detailed operation plan that includes, when applicable:

(a) Procedures for sampling, record keeping, and reporting of the sewage sludge to be utilized;

(b) Types of equipment to be used for collection, management, washdown, and other operations;

(c) Days and hours of operation;

(d) Methods and procedures to prevent or control odors and other potential nuisance conditions at the site;

(e) Methods and procedures for utilizing the treated sewage sludge;

(f) Contingency or emergency plans to manage equipment breakdown, spills, and other emergency events; and

(g) Methods and procedures for restricting public access to the site;

(12) Future use of the site; and

(13) Other information that may be requested by the Department.

E. The Department may reject an analysis of a sewage sludge sample submitted in accordance with §D(6) of this regulation and require retesting and resubmittal of results if the Department determines that the method of analysis is inaccurate, or for any other good cause.

F. Permit Application Fees.

(1) A person shall pay the Department a nonrefundable Sewage Sludge Utilization Permit Application fee in accordance with the following schedule:

(a) For a Permit Application, $350; and

(b) For a renewal permit application, $350.

(2) For activities which involve transportation of sewage sludge in combination with any other activities listed in the Sewage Sludge Utilization Permit Application, the Department will issue a single Sewage Sludge Utilization Permit to include all activities. For combined activities, only the application fee listed for transportation of sewage sludge in Regulation .23C of this chapter shall be waived.

Md. Code Regs. 26.04.06.43

Regulations .43 adopted effective 41:10 Md. R. 562, eff.5/26/2014