Md. Code Regs. 14.26.03.11

Current through Register Vol. 51, No. 22, November 1, 2024

Section 14.26.03.11 - [Effective until 1/1/2025] Labeling

A. Manufacturers of new products listed in Regulation .04 of this chapter shall identity each product offered for sale or installation, through retailers, in Maryland as being in compliance with the minimum efficiency standards established under Regulation .05 of this chapter by means of a mark, label, or tag on the product or packaging at the time of sale or installation. The mark, label or tag shall consist of the letter "M" within a circle. The circle may not be less than 1/2 inch in diameter.

B. Labels may be permanently affixed or may be temporary or removable labels of any kind including hanging labels.

C. All display models of products shall be displayed with a mark, label, or tag on the product.

D. Manufacturers offering products for sale or installation in Maryland are not required to place a mark, label, or tag on a covered product, if a mark is already on the product or packaging that reflects that the product meets an efficiency standard at least equal to the one required by the Act.

E. If a national efficiency standard is established by Federal law or regulation for a product, this labeling requirement does not apply to that product.

Md. Code Regs. 14.26.03.11

Regulations .11 adopted effective June 19, 2006 (33:12 Md. R. 998)