Md. Code Regs. 11.22.03.20
Current through Register Vol. 51, No. 26, December 27, 2024
| Procedures: | Reject Vehicle If: |
| (1) Cracks on driver's side. | (1) Any crack is through one or more layers of glass or there are two or more cracks extending from an outer edge into the windshield wiper sweep. |
| (2) Cracks on passenger side. | (2) Windshield is cracked so as to restrict vision. |
| (3) Chips. | (3) Windshield wiper sweep contains nicks, pits, or chips greater than 1/2 inch diameter. |
| (4) Vision. | (4) Vision is obscured by clouding or other conditions. |
| (5) Tinting. | (5) Windshield contains any add-on tinting. |
| (6) Stickers. | (6) Windshield wiper sweep area contains any stickers. |
| (7) Type. | (7) Windshield is not AS-1 or AS-10 laminated safety glazing. |
| (8) Presence. | (8) Any part of windshield is missing. |
| Procedures: | Reject Vehicle If: |
| (1) Operation. | (1) Window on driver's side does not open or close. |
| (2) Push-out windows . | (2) Manufactured after September 1, 1983 and is not equipped with push-out windows. |
| (3) Cracks. | (3) Any window contains a sharp or jagged edge, or is cracked so as to restrict vision. |
| (4) Obstructions. | (4) Any window is obstructed to restrict vision. |
| (5) Tinting. | (5) Any window to the immediate right or left of the driver contains add-on tinting. |
| (6) Type. | 6) Any window to the immediate right or left of the driver is not AS-1, AS-2, AS-10, or AS-11 safety glazing, or any other side window is not AS-1, AS-2 AS-3, AS-4, AS-5, AS-10, or AS-11 safety glazing. |
Md. Code Regs. 11.22.03.20