Md. Code Regs. 11.19.03.04

Current through Register Vol. 51, No. 12, June 14, 2024

Section 11.19.03.04 - Bumpers

A. A front bumper shall be provided, and shall:

(1) Be painted black;

(2) Extend to protect the outer edges of the fenders;

(3) Be of sufficient strength to permit pushing another vehicle of comparable weight without permanent deformation; and

(4) Be located at a height of between 14 inches and 18 inches when measured from the bottom edge of the bumper to the level surface on which the unloaded bus stands.

B. A rear bumper shall be provided by the body manufacturer and it shall:

(1) Have at least a 7-inch face;

(2) Be at least 3/16 inch thick steel, or equivalent material;

(3) Be attached directly to the chassis frame with provisions for easy removal;

(4) Be constructed so as to prevent hitching to or riding on it;

(5) Be of sufficient strength to permit the vehicle to be pushed by another vehicle without permanent distortion;

(6) Extend at least 1 inch beyond the rearmost part of the body surface measured at the floor line;

(7) Be painted black; and

(8) Be located at a height of between 14 inches and 18 inches from the bottom edge to the level surface upon which the unloaded vehicle stands.

Md. Code Regs. 11.19.03.04

Regulations .04 amended effective June 3, 1985 (12:11 Md. R. 1050)
Regulations .04 adopted effective April 19, 1999 (26:8 Md. R. 616)