Md. Code Regs. 11.19.02.09

Current through Register Vol. 51, No. 12, June 14, 2024

Section 11.19.02.09 - Frame

A. The frame or its equivalent shall be of such design as to correspond at least to the standard practice for trucks of the same general load characteristics which are used for severe service.

B. The chassis frame shall extend at least to the rear edge of the rear body cross-member. Alteration in the length of the frame shall be made only behind the rear hangers of the rear springs and may not be for the purpose of extending the wheel base. Any alterations to the frame shall be made only when designed and guaranteed by the original chassis or body manufacturer.

C. When frame side members are used, they shall be of one-piece construction. If frame side members are extended, the extension shall be designed and furnished by the chassis or body manufacturer with his guarantee, and installation shall be made by either the chassis or the body manufacturer and guaranteed by the company making the installation.

Md. Code Regs. 11.19.02.09

Regulations .09 amended effective April 3, 1981 (8:7 Md. R. 643)
Regulations .09, amended as an emergency provision effective July 6, 1983 (10:15 Md. R. 1342); emergency status extended at 10:22 Md. R. 1964 and 11:4 Md. R. 313
Regulations .09B amended effective June 18, 1984 (11:12 Md. R. 1063)
Regulations .09 repealed effective June 1, 1987 (14:11 Md. R. 1261)
Regulations .09 adopted effective June 1, 1987 (14:11 Md. R. 1261)