Procedures: | Reject Vehicle If: |
(1) Inspect for safety signs/warnings installed by the vehicle manufacturer. | (1) Any safety sign/warning, if originally installed by the manufacturer, has obviously been removed, tampered with, or is otherwise not permanently attached and visible as designed by the vehicle manufacturer. |
Procedures: | Reject Vehicle If: |
(1) Inspect low speed vehicle disclosure decal for presence, mounting requirements, legibility, and the following required wording: | (1) Low speed vehicle disclosure decal is missing, not permanently affixed, improperly located, not clearly legible, or fails to contain the required wording. |
LOW SPEED VEHICLE DISCLOSURETHIS VEHICLE IS CLASSIFIED AS A LOW SPEED VEHICLE. THIS VEHICLE: "* Has a maximum speed of greater than 20 miles per hour, but less than 25 miles per hour; "* May not be operated on a public highway with a speed limit in excess of 30 miles per hour; "* May be a hazard on the roadways if it impedes traffic; and "* May subject the driver to citations for impeding traffic. | |
Agency Note: Consult vehicle manufacturer for any additional information. |
Md. Code Regs. 11.14.09.26
Regulations .26 adopted as an emergency provision effective March 9, 2007 (34:9 Md. R. 824); emergency provision expired September 5, 2007
Regulations .26 adopted effective September 10, 2007 (34:18 Md. R. 1580)