Md. Code Regs. 11.14.02.05

Current through Register Vol. 51, No. 12, June 14, 2024

Section 11.14.02.05 - Fuel System

A. The fuel system includes the fuel tank, fuel pump, and necessary piping to carry the fuel from the tank to the carburetor or to the injection system. The engine shall be running when inspecting this system for leaks.

Procedures:	Reject Vehicle If:
(1) Visually examine the fuel tank, fuel tank support straps, filler tube (rubber, plastic, metal), tube clamps, fuel tank vent hoses or tubes, filler housing drain, overflow tubes, filler cap, fuel filter and carburetor, or injection system.	(1) Any part of system is not securely fastened.
(2) Inspect for proper operation of choke, hand throttle, and accelerator.	(2) There is fuel or vapor leaking at any point in the system.
	(3) Fuel tank cap is missing.
	(4) Overflow or vent tube is missing or obstructed.
	(5) Filler tube is leaking, collapsed, or deteriorated.
	(6) If choke, throttle, or accelerator does not function properly, i.e., there is binding, roughness, or failure to return to released position.

Regulation .05 amended effective April 1, 1991 (18:6 Md. R. 686)