Current through Register Vol. 51, No. 22, November 1, 2024
Section 11.13.11.04 - Load CoversA. Load covers are not required on:(1) Any Class K (farm area) vehicle as defined in Transportation Article, § 13-935, Annotated Code of Maryland;(2) Any Class E (truck) vehicle registered or capable of being registered under Transportation Article, § 13-917, Annotated Code of Maryland, regardless of the date of manufacture or how the vehicle is loaded provided the vehicle manufacturer's original design specifications for bed enclosures have not been altered to increase the vehicle's load carrying capacity;(3) Any Class G (trailer) vehicle registered or capable of being registered under Transportation Article, § 13-927, Annotated Code of Maryland, carrying loose material if the top of the load is not within 6 inches of the top of any enclosure it touches;(4) Any construction vehicle working within the confines of a public works construction work project site as outlined in the construction project's plans and specifications, provided the distance travelled does not exceed 1 mile or the distance specified in an extension granted by the Maryland Department of Transportation;(5) Any construction vehicle or mining equipment while crossing a highway between construction or mining sites; or(6) Within the Port of Baltimore for a distance not to exceed 1 mile, any vehicle carrying a load of loose material between a stockpile or storage facility and a vessel docked at the port; B. Load covers are required when carrying loose material on a: (1) Class E (truck) vehicle registered or capable of being registered under Transportation Article, § 13-917, Annotated Code of Maryland, on which the manufacturer's original design specifications for bed enclosures have been altered to increase the vehicle's load carrying capacity;(2) Class G (trailer) vehicle registered or capable of being registered under Transportation Article, § 13-927, Annotated Code of Maryland, regardless of the date of manufacture, and carrying loose material if the top of the load of loose material is within 6 inches of the top of any enclosure it touches;(3) Vehicle not otherwise exempted after January 1, 1992 regardless of how the vehicle is loaded.Md. Code Regs. 11.13.11.04
Regulation .04 amended effective 41:21 Md. R. 1260, eff.10/27/2014